What size will a 250cc implant get me to? 18 year old female, 36A, 150lbs, 5'5".

It is very difficult without assessing you in person to know what implant size and profile will be a good fit for you. 250cc implants can look very different on each person. Keep in mind that implant size selection not only depends on your personal preference, but it also depends on your unique measurements. There are various types of implants that can help you attain the look you are going for. A thorough consultation with a board certified plastic surgeon will allow you to communicate what your desired result is and will inform you as to what is possible to achieve your goals. We have a device called the Vectra 3D imaging system that shows you what you will look like with any implant. Our patients are very happy with the choice of implant they make when using this system. To learn more about breast augmentation, you can read “A Comprehensive Guide to Breast Augmentation."

Thank you for your question. Please see a board certified plastic surgeon for an in-person assessment. 

Thank you for your question. A 200cc implant will increase your bra cup by approximately one bra cup size.  My strong advice is that you consider an additional consultation with your plastic surgeon and try on implants to determine the size that best meets your requirements.  Best of luck.

Hello,Thank you for your question. Cup sizes are quite variable as bra manufacturers really don't have set standards. Your Plastic Surgeon will recommend sizes which fit you proportionately based on your measurements as well as your existing breast tissue, and the look that you desire. For some people who have a small frame and measurements, 250 will appear full. My patients find it helpful to try on the implant sizers with a form-fitting T-Shirt in order to get an idea of the look that they will achieve. Be sure to seek a board certified Plastic Surgeon who specializes in this procedure.All the best

Hi N.S.  Toronto has a lot of great plastic surgeons. I'm sure you have found a good one.   That said, you may want to go slightly bigger if you want to go from an A to a C.  Maybe revisit the office of your PS for a second visit. Here are a few tips for you because this is perhaps
the hardest decision for a patient to make, as well as the surgeon.  Also see the video attached to my answer.  We spend up to two hours for our BA consults
to be sure there is careful communication. We do a full exam in front of a
full-length mirror taking six exact measurements.    We
put your photos on a large computer screen for imaging, and go over your
“ideal-size” photos. We then save this information to your password protected
“web account.”
     First and
foremost the implant should fit the dimensions of your breast and tissue cover.
 Balancing the implant to your
over-all body shape and tissue cover is essential.    The main thing is to
have the diameter of the implant fit the diameter of your breast "foot-print".
 Higher profile implants tend to have a smaller diameter.  Higher is really a marketing term, but often
translates into the same volume implant with a narrower base.  Saline implants actually tend to decrease in
diameter as they are inflated!  The average size chosen over our last 7,000 breast implants was
“350cc”.  BUT, 90% of our patients tell us they wish they were
bigger a year after BA.  (We will see you
every year for routine checks at no charge.) It’s like your mind incorporates
the "new you" into your own self-image over a period of time. Cup size estimates can be misleading, but I generally advise patients
that they will experience an increase of approximately one cup size per 200 cc.
 You can try on implants in the office by
placing them into a special bra.  The implant is also flattened somewhat when under
the muscle, so it is a good idea to bump it up a bit. Approximately 1-ounce (25cc) is added to the final volume to account for
flattening of the implant in the partial sub-muscular pocket.  Once you decide on a size you like, then add
on 25cc, because in real life the implant will be flattened slightly by your
tissues.  Multiple measurements need to
be taken to fit an implant to your exact anatomy.  Have your surgeon's
office show you the charts of the implant dimensions for the various profiles
of silicone and saline from the manufacturer.  Then you and your surgeon
can piece together the puzzle by matching your measurements, with your wishes,
versus your tissue cover and the available implants to arrive at
a surgical plan.  Keep in mind
larger implants tend to have more problems over the years.  Since silicone implants wrinkle less than
saline implants, they might be your best bet.
     You can
also approximate this at home by measuring out an equivalent amount of rice
placed into a cutoff foot of old panty-hose, and put this in your bra.  Wear this around the house for a while, and
see what you think.  Implant size must
square with assessments of tissue cover, breast diameter, and chest wall width.
 Multiple measurements of your chest wall
are taken (seven in total).  Implant size
selection has been an issue of much discussion.
    
Therefore, I use a wide variety of methods, but the implant size is
always established preoperatively.  Also,
patients are advised to bring reference photos demonstrating their ideal size
and shape.  A photo album of patient
pictures is maintained to assist them.  These photos ultimately help in determining
where the implants will be placed, since they can be shifted inside (to provide
more cleavage), to the outside, up or superiorly, and down or inferiorly during
surgery.  In determining the final size
selection, I always place the highest priority on the preoperative measurements
and potential tissue cover.  Finally,
your verbal requests are factored into the analysis.
     We use
the quick-recovery approach, so click on the web reference link below to have
this explained and you can see the list of Quick-Recovery (Flash-Recovery or
Rapid-Recovery) Breast Augmentation articles from peer-reviewed surgery
journals.  It is a surgical procedure that
uses special instruments and techniques to minimize tissue damage and avoid
touching the ribs. It causes far less trauma to surrounding tissue than
traditional approaches, and it dramatically reduces pain and recovery time. In
published studies of BA patients, 95-percent of women interviewed after the
procedure returned to normal daily activities within 24-hours. Quick-recovery
BA is not a “gimmick.”  These specialized
techniques, which actually speed recovery and get you back to your daily
routine, kids and work, are published in our plastic surgery journals.  Because these PS journals are “peer-reviewed”
and edited, they are the gold-standard in our field as being valid science.
Therefore, these are sound techniques, not marketing hype. 
     Be sure
to see only a board certified plastic surgeon (by ABPS - The American Board of
Plastic Surgery) who is a member of ASAPS (The American Society for Aesthetic
Plastic Surgery) and or a member of ASPS (The American Society of Plastic
Surgeons).  Also, ask if the PS has an
established, high volume breast augmentation practice, performing several
hundred breast augmentations each year.  Be sure the PS has been in practice for a
while, about 20-years might be a good gauge. 
Does the PS offer all three incisions? 
Discuss the implant type (gel or saline), shaped "gummy bear"
or non-shaped, smooth or textured, implant pocket (over or under the muscle)
and the "quick-recovery approach." 
Ask to see their before and after photos if you didn’t see any on their
website.  If they are experienced, they should have several 100 breast
implant patients for you to view.  I would also recommend that your doctor
offer you the chance to talk to past patients who would be happy to discuss
their experience with you.  You need to feel comfortable, so make sure the
environment is safe as in an accredited surgery center.  Also, ask a prospective surgeon if he or she
has ever published journal articles in professional peer-reviewed journals,
which they can provide you.      
All the best, “Dr. Joe”
 
 

Dear N.S.Canada,Determining the ideal breast size and matching that goal for the patient is the most difficult part of breast augmentation. It starts and ends with the patient. We have all of our patients find 3 photos of their desired breast size. We ask for naked breast photos because clothing can obscure the true size (push up bras). Next, we consult with patients and go over the photos and take detailed breast measurements during a physical exam. Next, we using a sizing algorithm to determine a range of implants that will work based on the exam and the measurements. Lastly, during the operation, we use silicone sizers in the operating room to see how the size actually looks in the breast. We sit the patient up in the operating room, while asleep of course, and compare the sizer result with their desired look photos. If its too small, we start the process over with a slightly larger implant. We don't stop until we get the perfect match. Of all of my breast augmentation patients, everyone of them have been happy with their size due to this detailed and meticulous process. You don't want to invest time and money into a result that is either too big or too small.
Daniel Barrett, MD, MHA, MS 
Certified, American Board of Plastic Surgery  
Member, Am. Society of Plastic Surgery

Hello and thank you for your question.  Congratulations on your upcoming surgery.  The
best advice you can receive is from an in-person consultation.  The size, profile, and shape of
the implant is based on your desired breast size/shape, your chest wall
measurements, and soft tissue quality.  This decision should
be based on a detailed discussion with equal input from both you
and your surgeon.   
Best wishes and good luck.
Richard G. Reish, M.D.
Harvard-trained plastic surgeon

Breast size can be very confusing for both the patient and surgeon.  It really depends on so many factors for me to discuss here.In your situation, I think you need closer to the 400cc range to get a C-cup look (different than C-cup at Victoria Secret).Best Wishes,Nana Mizuguchi, MD

Implants do not match up exactly to cup size. A baggy test with the bra you want to will will give you rough estimate .

Thank you for the question.  
 
There is no accurate/reliable/predictable correlation between size/profile breast implant utilized and cup size achieved. For example, I do not think that the generalizations of "200 cc equates to 1 cup" hold any validity or are helpful in any specific or practical way.  In my practice, I ask patients not to communicate their goals, or evaluate the outcome of the procedure performed, based on cup size references.My best advice: more communication.
It is definitely worth spending more time (prior to the date of surgery) with your plastic surgeon to discuss further.  As you know, it will be important for many reasons, that you feel comfortable that you and your plastic surgeon are on the "same page" prior to proceeding.
Ultimately, careful selection of plastic surgeon and  careful communication of your goals (in my practice I prefer the use of goal pictures, direct examination/communication in front of a full-length mirror, in bra sizers, and computer imaging) as well as careful measurements (dimensional planning) will be critical.
  Generally speaking, the best online advice I can give to ladies who are considering breast augmentation surgery ( regarding breast implant size/profile selection) is:
1. Concentrate on choosing your plastic surgeon carefully. Concentrate on appropriate training, certification, and the ability of the plastic surgeon to achieve the results you are looking for. Ask to see lots of examples of his/her work.
2. Have a full discussion and communication regarding your desired goals with your plastic surgeon. This communication will be critical in determining breast implant size/type/profile will most likely help achieve your goals. 
In my practice, the use of photographs of “goal” pictures (and breasts that are too big or too small) is very helpful. For example, I have found that the use of words such as “natural” or  "full C cup" etc means different things to different people and therefore prove unhelpful.
Also, as you know, cup size varies depending on him who makes the bra; therefore, discussing desired cup size may also be inaccurate. Again, the use of computer imaging has been very helpful during the communication process, in our practice.
3. Once you feel you have communicated your goals clearly, allow your plastic surgeon to use his/her years of experience/judgment to choose the breast implant size/profile that will best meet your goals. Again, in my practice, this decision is usually made during surgery, after the use of temporary intraoperative sizers.
I hope this helps. Best wishes for an outcome that you will be very pleased with.