I'm switching my hp 650 silicone to 800 cc silicone. Any suggestions?

Most patients need at least 150cc increase in the implant size to even see a difference in the breast appearance.  The larger your current implant, the more it will take to see a difference.  When you already have 650cc HP, going up 150cc is only 1/4 of your current implant.  I would not expect a very large change.  The other thing to think about is changing to the UHP style.  The 800cc HP is pretty wide, so changing to an UHP would give you more fullness appearance without too much more width.  I hope this helps.

It is very difficult to determine the best implant you will need (recommended based on your photos) or the exact size and shape implant you will require to best match your ideal breast image without an examination by a board certified plastic surgeon. Not just any board certified plastic surgeon, but one with many years of frequently performing breast augmentation surgery including different approaches, techniques and implant choices. This is because several measurements not to mention your breast characteristics are needed to determine the optimal implant size to obtain your goals. Without knowing these dimensions it would be difficult to make this determination. For example, the existing base width of your breast will determine, in many cases, the maximal volume per implant profile that you can accommodate. To illustrate; a 100 cc difference may make a significant difference with a narrow base width breast, but much less of a difference if you have a wide chest wall and wide breast “foot print”. Therefore, just because your friend may have a great result with let’s say a 300 cc implant to make her go from a “A” cup to a “C” cup size does not mean that you will have the same result with the same size implant. The same process goes for just filling in the upper part of your breast without becoming much larger. Further simply placing implants in a bra to determine the size best for you is not always accurate as the bra often distorts the size, is dependent on the pressure the bra places plus the implant is outside your breast and not under it among other variables. Computer software morphing programs that automatically determine the best implant size can be helpful in some but not all cases (e.g. doesn’t work well in my experience with existing implants, sagging or asymmetric breasts). Using “want to be” photos however are useful if simply provided to the surgeon as I will further explain in the link below including silicone vs saline implants.

I appreciate your question.

The size of implant best for you is dictated by your
chest wall measurements. Once we determine that we can choose the profile
based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance. Other than that, you should choose the implant based on volume, not on the dimensions of the implant.   As implant
size goes up, and the amount of natural amount of breast tissue you have goes down, and the
less natural a result do you get. One technique to have a more 'natural' result
while still having a large augmentation is to use shaped implants. That being
said, this relationship still holds and with bigger implants the final result
tends to be more 'sculpted' or 'augmented' and more obvious or easier to
identify even when in clothes. Choosing an implant is a complex process and I
definitely recommend setting up a formal consultation with a board certified
plastic surgeon to help guide you with this decision.

Silicone will give you a fullness at the
top (upper pole fullness).

Silicone implants come pre-filled with a
silicone gel and are the softest implant available. They feel more natural,
which makes them a good option for women with less natural breast tissue; but
they require a larger incision. It may be more difficult to realize if this
type of implant has ruptured, so it is important to monitor them with annual
follow-up visits. Additionally, because this implant contains a more liquid
silicone (less cross-linked), if this implant should rupture, it will leak only
into the scar capsule formed around the implant but may cause some discomfort
or implant distortion.

Anatomic gummy bear implants might be a
good choice to give you volume.

These highly-sought-after, anatomic
implants offer a look that more closely resembles the natural silhouette of a
breast, and, therefore, are a very attractive option for individuals seeking a
natural-looking, aesthetic primary breast augmentation. Additionally, these
implants are an especially excellent option for patients undergoing restorative
or corrective breast surgery because they provide more stability, shape, and
reduced incidence of capsular contracture. Compared to other types of silicone
gel implants, the silicone in the cohesive gel implant is more cross-linked;
therefore, should the implant shell “rupture,” it maintains its shape and
silicone does not leak.

During your breast augmentation
consultation, you should feel the different types of implants available, and
try on various implant sizers in front of a mirror to help you to get an idea
of how you will look following the surgery. You should also bring pictures of
the look you would like to achieve, as well as a favorite top to wear when
trying on implant sizers.

The best way to assess and give true
advice would be an in-person exam.

Please see a board-certified plastic
surgeon that specializes in aesthetic and restorative breast surgery.Best of luck!

Dr. Schwartz

Board
Certified Plastic Surgeon

Director-Beverly
Hills Breast and Body Institute

#RealSelf100Surgeon