Is Crisalix 3D accurate in predicting what my 525cc implant will look like? (photo)

At the end of the day, a simulation is just that...a simulation. There is no guarantee of result. They are meant to be a tool (one of many) to assist the patient in making a decision.
In my experience, I have found these sorts of imaging programs to be helpful giving a generalized idea of size and shape. They cannot, however, reproduce reality. When comparing pre-op sims to post op results, I have found them to be not wholly inaccurate but far from predictive.Patients often think in terms of cup size when considering augmentation. Unfortunately, devices are sized in terms of milliliters (cc) of volume. This can lead to some confusion when sizing. Additionally, it is important to remember that cup size itself is not standardized with variations from one manufacturer to another. Unfortunately, as many women can attest their cup size in an industry leader such as VS is not necessarily transferable to another brand.
Another point which is often under appreciated is that of anatomy and starting point. Any implant will add volume to the volume which is already present. The implant is additive. A particular volume will not necessarily confer the same cup size to different patients (often times it will not even confer the same cup size to different breasts in the same individual...remember they are "sisters" not "twins"). 
A general rule of thumb is that 125cc can represent somewhere between 1/2 to a full cup size increase. Smaller volume differentials (25-50cc) are typically less consequential representing a volume change of less than a shot glass. However, I have found these numbers, at least anecdotally, to be of little help. Patients often present with notions/goals which do not correlate with these sorts of sterile volumetric assessments.
When sizing patients, there are a number of useful tools including:
-3D imaging (has the added benefit of offering a volumetric analysis of the pre-operative breast)
-Breast sizers (rice bags)
-Goal photos
I also recommend that patients commit to a particular look rather than a cup size. Once a patient settles on a look that pleases them the overall cup size increase becomes less relevant.
The key to obtaining a natural result is to stay within the parameters defined by your BWD. This will ensure that you avoid the dreaded "fake" look. Without measures or photos, any advice beyond this will be limited.
As always, discuss your concerns with a board certified plastic surgeon (ABPS).

Crisalix and Vectra are excellent and amazing technology.  However.  I have found patients have a hard time picking an accurate off the screen.  I suggest that you try these proposed implants in a sports bra.  I have found that patients like overly big implants on the screen.  

I appreciate your question!

After performing hundreds of breast augmentations, I have found that the size of implant best for you is dictated by your chest wall measurements. Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance. Other than that, you should choose the implant based on volume, not on the dimensions of the implant. You should choose a board certified plastic surgeon that you trust to help guide you in this decision. Bringing photos as well can help us to finalize, but please understand that these are of other people’s bodies and your results will probably be different.

Silicone will give you fullness at the top (upper pole fullness). Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a softer silicone (less cross-linked), if this implant should rupture, it may leak but only into the scar capsule formed. However, the newer silicone in these implants may not leak even when the implant shell is ruptured.

Anatomic gummy bear implants might be a good choice to give you a more natural look. These highly sought after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, is a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak.

During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers. I also use a 3D imaging system to allow you to try on a variety of shapes and sizes. I prefer this method over adding volume due to implants being under the muscle.

We will also discuss the possibility of needing a lift along with an implant. This will depend on the amount of ptosis (nipple position) as it relates to your breast, inframammary crease and chest wall. Needing a lift or not will also determine where to place the scar for the incision.  In some cases if the breast and nipple is really ptotic (low) it might be best to stage the procedure by performing a lift first and then doing an implant at a second stage. This will also allow you to have a better understanding of the true size and shape of your breast.

The best way to assess and give true advice would be an in-person exam. Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.

Best of luck!

Dr. Schwartz

Board Certified Plastic Surgeon 

#RealSelf100Surgeon

#RealSelfCORESurgeon

3-D imaging can be very helpful getting an idea what an augmentation would look like.  I use the VECTRA system and patients like it.  For patients with little droop to their breast, software images can be pretty close to reality.  For those with droop, not a good.  I would not use the technology to try to choose between two sizes because it's just too hard to tell the difference.  Also, be assured, that the difference between two sizes in reality is usually not too great.  Take the advice of your experienced surgeon, but also, take responsibility for your choice.

Thank you for the question and photographs.
 
Generally speaking, although useful as rough guidelines and as communication tools, all the modalities currently used to predict what breast implant size/profile will best achieve a patient's goals with breast augmentation are NOT very accurate, in my opinion. The use of the rice test, sizers placed beneath a patient's bra, goal pictures, computer imaging technology… are all useful, but not necessarily as accurate as one would hope.
In my opinion, nothing will replace careful verbal preoperative communication with your plastic surgeon, preferably in front of a full-length mirror along with the use of as many "communication" tools” listed above.
In my practice, I use all of the above modalities and then use intraoperative temporary sizers to help determine the best breast implant size/profile to achieve a patient's specific goals as closely as possible. For this reason, I think it is helpful to have the entire range of breast implant sizes/profiles available in the operating room.
Achieving realistic expectations prior to proceeding to the operating room is also an important part of the preoperative communication process. Patients should be aware that the results of their breast augmentation will not necessarily match exactly what they are visualizing with anyone of the above-mentioned communication tools.
 
Given your questions and concerns, I would suggest that you schedule additional time to spend with your plastic surgeon. This additional time spent will be helpful in the communication process and in alleviating some of your anxiety.
Generally speaking, the best online advice I can give to ladies who are considering breast augmentation surgery ( regarding breast implant size/profile selection) is:
1. Concentrate on choosing your plastic surgeon carefully. Concentrate on appropriate training, certification, and the ability of the plastic surgeon to achieve the results you are looking for. Ask to see lots of examples of his/her work.
2. Have a full discussion and communication regarding your desired goals with your plastic surgeon. This communication will be critical in determining breast implant size/type/profile will most likely help achieve your goals. 
In my practice, the use of photographs of “goal” pictures (and breasts that are too big or too small) is very helpful. For example, I have found that the use of words such as “natural” or "proportionate" or "C or D cup" etc means different things to different people and therefore prove unhelpful.
Also, as you know, cup size varies depending on him who makes the bra; therefore, discussing desired cup size may also be inaccurate. Again, the use of computer imaging has been very helpful during the communication process, in our practice.
3. Once you feel you have communicated your goals clearly, allow your plastic surgeon to use his/her years of experience/judgment to choose the breast implant size/profile that will best meet your goals. Again, in my practice, this decision is usually made during surgery, after the use of temporary intraoperative sizers.
I hope this helps. Best wishes for an outcome that you will be very pleased with.

Your best bet when you are trying to decide on implants is to try on sizers of the exact implant you are considering inside a very tight sports bra. This will give you a close idea of what you will look like. More importantly the dimensions or width of the implants need to match and fit your frame and body. If you are working with a board certified plastic surgeon with an expertise in breast augmentation he or she should be able to help you with this in their office. Good luck!  
Dean Vistnes, M.D.
Vistnes Plastic Surgery 
San Francisco Bay Area
#drdeanvistnes #breastaugmentation