Should I get 310 or 330cc? (Photos)

The difference between 310 and 330cc is 20cc, a bit over one tablespoon, essentially inconsequential.  In the end, only YOU can decide which size, shape, projection, and position is best for YOUR breasts.  My routine is to inform women of their choices, advantages and disadvantages, try different sizes on, and go with whatever she chooses.  I don't believe it's appropriate for someone else, even a surgeon, to make this decision for you.

It is very difficult without assessing you in person to know what implant size will give you your desired look. Keep in mind that implant size selection not only depends on your personal preference, but it also depends on your unique measurements. The size differences between the implants you mentioned are minimal. There are various types of implants that can help you attain the look you are going for. A thorough consultation with a board certified plastic surgeon will allow you to communicate what your desired result is and will inform you as to what is possible to achieve your goals. We have a device called the Vectra 3D imaging system that shows you what you will look like with any implant. Our patients are very happy with the choice of implant they make when using this system. To learn more about breast augmentation, you can read “A Comprehensive Guide to Breast Augmentation.”

I appreciate your question!

After performing hundreds of breast augmentations, I have found that the size of implant best for you is dictated by your chest wall measurements. Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance. Other than that, you should choose the implant based on volume, not on the dimensions of the implant. You should choose a board certified plastic surgeon that you trust to help guide you in this decision. Bringing photos as well can help us to finalize, but please understand that these are of other people’s bodies and your results will probably be different.

Silicone will give you fullness at the top (upper pole fullness). Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a softer silicone (less cross-linked), if this implant should rupture, it may leak but only into the scar capsule formed. However, the newer silicone in these implants may not leak even when the implant shell is ruptured.

Anatomic gummy bear implants might be a good choice to give you a more natural look. These highly sought after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, is a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak.

During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers. I also use a 3D imaging system to allow you to try on a variety of shapes and sizes. I prefer this method over adding volume due to implants being under the muscle.

We will also discuss the possibility of needing a lift along with an implant. This will depend on the amount of ptosis (nipple position) as it relates to your breast, inframammary crease and chest wall. Needing a lift or not will also determine where to place the scar for the incision.  In some cases if the breast and nipple is really ptotic (low) it might be best to stage the procedure by performing a lift first and then doing an implant at a second stage. This will also allow you to have a better understanding of the true size and shape of your breast.

The best way to assess and give true advice would be an in-person exam. Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.

Best of luck!

Dr. Schwartz

Board Certified Plastic Surgeon 

#RealSelf100Surgeon

#RealSelfCORESurgeon

The difference is minimal, just over a tablespoon's worth.  The implant selection should be based on a combination of your desired size, soft tissue dynamics, breast base diameter and skin elasticity.  I recommend an in-office examination as well as a detailed discussion with a surgeon who you are comfortable with.   Finally, make sure your surgeon is a Double-Board Certified Plastic Surgeon certified by the American Board of Plastic Surgery (ABPS), a member of the American Society of Plastic Surgery (ASPS) and the American Society of Aesthetic Plastic Surgery (ASAPS).Best,Dr. DesaiBeverly Hills Institute for Aesthetic Plastic SurgeryHarvard Educated, Beverly Hills & Miami Beach Trained, Double-Board Certified Plastic Surgeon

Hello and thank you for your question.  The
best advice you can receive is from an in-person consultation.  310-345cc should achieve your goals.  The size, profile, and shape of
the implant is based on your desired breast size/shape, your chest wall
measurements, and soft tissue quality.  This decision should
be based on a detailed discussion with equal input from both you
and your surgeon.   Make sure you specifically look
at before and after pictures of real patients who have had this surgery
performed by your surgeon and evaluate their results.   The most
important aspect is to find a surgeon you are comfortable with. I recommend
that you seek consultation with a qualified board-certified plastic surgeon who
can evaluate you in person.
Best wishes and good luck.
Richard G. Reish, M.D.
Harvard-trained plastic surgeon

Patients often think in terms of cup size when considering augmentation. Unfortunately, devices are sized in terms of milliliters (cc) of volume. This can lead to some confusion when sizing. Additionally, it is important to remember that cup size itself is not standardized with variations from one manufacturer to another. Unfortunately, as many women can attest their cup size in an industry leader such as VS is not necessarily transferable to another brand.
Another point which is often under appreciated is that of anatomy and starting point. Any implant will add volume to the volume which is already present. The implant is additive. A particular volume will not necessarily confer the same cup size to different patients (often times it will not even confer the same cup size to different breasts in the same individual...remember they are "sisters" not "twins"). 
A general rule of thumb is that 125cc can represent somewhere between 1/2 to a full cup size increase. Smaller volume differentials (25-50cc) are typically less consequential representing a volume change of less than a shot glass. However, I have found these numbers, at least anecdotally, to be of little help. Patients often present with notions/goals which do not correlate with these sorts of sterile volumetric assessments.
When sizing patients, there are a number of useful tools including:
-3D imaging (has the added benefit of offering a volumetric analysis of the pre-operative breast)
-Breast sizers (rice bags)
-Goal photos
I also recommend that patients commit to a particular look rather than a cup size. Once a patient settles on a look that pleases them the overall cup size increase becomes less relevant. Remember...love the look...not the cup.
With regards to your specific question, the best advice is to select a device which is compatible with your unique measurements. I encourage patients to choose an implant selection with a certain breast width (which matches or slightly underestimates their own BWD). This will ensure that the device will fit in the footprint of their native breast tissue and be adequately camouflaged without too much lateral show (the dreaded "fake look"). If she is seeking more volume, she can consider a similar sized high profile device which will offer greater cc's and projection in the same base width.
As always, discuss your concerns with a board certified plastic surgeon (ABPS).

Congrats on your upcoming surgery.  The difference between a 310 cc and 330 cc implant is negligible.  One tablespoon is 15 cc.  At this point you have narrowed your size down to a good point.  I would now suggest you leave it in your plastic surgeons hands to fine tune things.You really would not be able to discern the difference between the two implants.  In certain cases, given some breast asymmetry, patients wind up having different sizes placed to obtain better symmetry.I would not overly concern yourself with the difference between the two numbers. Hope that helps. 

Dear emladino,determining the ideal breast size and matching that goal for the patient is the most difficult part of breast augmentation. It starts and ends with the patient. We have all of our patients find 3 photos of their desired breast size. We ask for naked breast photos because clothing can obscure the true size (push up bras). Next, we consult with patients and go over the photos and take detailed breast measurements during a physical exam. Next, we using a sizing algorithm to determine a range of implants that will work based on the exam and the measurements. Lastly, during the operation, we use silicone sizers in the operating room to see how the size actually looks in the breast. We sit the patient up in the operating room, while asleep of course, and compare the sizer result with their desired look photos. If its too small, we start the process over with a slightly larger implant. We don't stop until we get the perfect match. Of all of my breast augmentation patients, everyone of them have been happy with their size due to this detailed and meticulous process. You don't want to invest time and money into a result that is either too big or too small.Daniel Barrett, MD, MHA, MS 
Certified, American Board of Plastic Surgery 
Member, Am. Society of Plastic Surgery

Thank you for your question. "Tissue based planning" relies on your chest and breast measurements and is the safest way to ensure good long term results. Your surgeon should determine what size and projection are necessary to give you your desired result based on your body's measurements. The best way to assess and give true advice would be an in-person exam. Please see a board-certified plastic surgeon that specializes in aesthetic breast surgery. Hope this helps and good luck with your surgery.

as either one is still going to make a huge difference.  Find out what profiles in those volumes would work best if gel and go for that.  But the general dissatisfaction with my patients is that they wish they went bigger so would suggest the 330 cc and don't look back... you know this is about 4 tsp only.