Would it be a problem if the gel trap is inserted into the Cool Mini applicator before the liner?

Hello and thank you for your question. I would recommend doing face tight for your neck and jaw. This procedure will help with reducing the fat and tightening. It is done with radio frequency and lipo suction on the neck and jaw area.

Hello,Thank you for your question and picture. Cool Mini will not address asymmetry in the face. You may want to talk with provider about dermal fillers. It’s a simple solution that yields great results. Good luck! 

Dear tania_f: The fat wrapped around the marginal mandibular nerve can be effected by Kybella, resulting in an altered smile. This side effect takes 2 weeks to more than two months to wear off, but is not permanent. If this has happened, it can be avoided in future treatments. Firstly, the...

Hello, Thank you for your question and pictures. It may be best to wait for fillers until you achieve the full results of your second CoolMini. A more sculpted jawline will affect how the doctor treats you with fillers! Good luck and congratulations on your first treatment!

Hello and thank you for your question. I would recommend doing the 2 cycles one month apart. That will be the most effective.

Hi there! Thanks for your question! There should be no harm due to the thermal event. The sensors in the CoolSculpting applicator will detect a problem and automatically shut off the cooling. The area will need to be treated again for the full 45 minutes to get best results. Best of luck!