What size implant should I get? I’m 5’2” and about 109lbs. (photos)

I appreciate your question
After performing hundreds of breast augmentations, I have found that the size of implant best for you is dictated by your chest wall measurements.  Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance. Implants that are wider than this can be more palpable, fall more laterally overtime and also be more palpable. After that we will then choose the implant volume based on the measurements and also looking at any asymmetries you might have. You should choose a board certified plastic surgeon that you trust to help guide you in this decision. Bringing photos as well can help us to finalize, but please understand that these are of other peoples bodies and your results will probably be different.
Silicone will give you a fullness at the top (upper pole fullness). Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a more softer silicone (less cross-linked), if this implant should rupture, it may leak but only into the scar capsule formed. However, the newer silicone in these implants may not leak even when the implant shell is ruptured. 
Anatomic gummy bear implants might be a good choice to give you a more natural look. These highly-sought-after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, are a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak.
 Implants, indifferent projections. The easiest way to think about it is they called me in a low medium and high projection or profile. Most of the time I use the medium profile which gives people the best in terms of natural look as well as a little bit of projection. High profile implants are for someone that wants  A little bit more of a fuller look. Low profile implants are better for someone that really wants a minimal extremely natural augmentation. Depending upon the anatomic versus round implants there are also subtle differences  in terms of the amount of projection for each profile. 
During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers. I also use a 3D imaging system to allow you to try on a variety of shapes and sizes. I prefer this method over adding volume due to implants being under the muscle.
We will also discuss the possibility of needing a lift along with an implant. This will depend on the amount of ptosis (nipple position) as it relates to your breast, inframammary crease and chest wall. Needing a lift or not will also determine where to place the scar for the incision.  In some cases if the the breast and nipple is really ptotic (low) it might be best to stage the procedure by performing a lift first and then doing an implant at a second stage. This will also allow you to have a better understanding of the true size and shape of your breast.
In order to limit pain from breast augmentation and speed the recovery process I offer patients Botox into their muscles as well as a long acting numbing medication called exparel. 
The best way to assess and give true advice would be an in-person exam. Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.
best of luck!
Dr Schwartz
Board Certified Plastic Surgeon 
#RealSelf100Surgeon
#RealSelfCORESurgeon

Dear akarissa,Breast implant type and sizing selection is a complicated process and requires a detailed consultation that includes a discussion of your goals, a detailed examination, and a lengthy discussion. But the decision will always start and end with the patient. When it comes to sizing, we have all of our patients find 3 photos of their desired breast size. We ask for naked breast photos because clothing can obscure the true size (push up bras). Next, we consult with patients and go over the photos and take detailed breast measurements during a physical exam. Next, we using a sizing algorithm to determine a range of implants that will work based on the exam and the measurements.Lastly, during the operation, we use silicone sizers in the operating room to see how the size actually looks in the breast. We sit the patient up in the operating room, while asleep of course, and compare the sizer result with their desired look photos. If it is too small, we start the process over with a slightly larger implant. We don't stop until we get the perfect match.Of all of my breast augmentation patients, every one of them has been happy with their size due to this detailed and meticulous process. You don't want to invest time and money into a result that is either too big or too small.You should discuss your concerns with a board-certified plastic surgeon and make sure that your surgeon understands your goals.Daniel Barrett, MD
Certified, American Board of Plastic Surgery
Member, American Society of Plastic Surgery
Member, American Society of Aesthetic Plastic Surgery

Hello and thank you for your question. You are a great candidate
for a breast augmentation.  The size, profile, and shape of the
implant is based on your desired breast size/shape, your chest wall
measurements, and soft tissue quality.  This decision should
be based on a detailed discussion with equal input from both you
and your surgeon.  This entire surgery
can be performed with a small incision technique.  Make sure you
specifically look at before and after pictures of real patients who have
had this surgery performed by your surgeon and evaluate their results.   The most important aspect is to find a
surgeon you are comfortable with. I recommend that you seek consultation with a
qualified board-certified plastic surgeon who can evaluate you in person.
Best wishes and good luck.
Richard G. Reish, M.D. FACS
Harvard-trained plastic surgeon

Patients often think in terms of cup size when considering augmentation. Unfortunately, devices are sized in terms of milliliters (cc) of volume. This can lead to some confusion when sizing. Additionally, it is important to remember that cup size itself is not standardized with variations from one manufacturer to another. Unfortunately, as many women can attest their cup size in an industry leader such as VS is not necessarily transferable to another brand.
Another point which is often under appreciated is that of anatomy and starting point. Any implant will add volume to the volume which is already present. The implant is additive. A particular volume will not necessarily confer the same cup size to different patients (often times it will not even confer the same cup size to different breasts in the same individual...remember they are "sisters" not "twins"). 
A general rule of thumb is that 125cc can represent somewhere between 1/2 to a full cup size increase. Smaller volume differentials (25-50cc) are typically less consequential representing a volume change of less than a shot glass. However, I have found these numbers, at least anecdotally, to be of little help. Patients often present with notions/goals which do not correlate with these sorts of sterile volumetric assessments.
When sizing patients, there are a number of useful tools including:
-3D imaging (has the added benefit of offering a volumetric analysis of the pre-operative breast)
-Breast sizers (rice bags)
-Goal photos
I also recommend that patients commit to a particular look rather than a cup size. Once a patient settles on a look that pleases them the overall cup size increase becomes less relevant.The key to obtaining a natural result is to stay within the parameters defined by your BWD. This will ensure that you avoid the dreaded "fake" look. 
Based upon your description, your choices sound reasonable (without an in-person exam or measures little more can be said with certainty). The 25 cc differential will be subtle as it only amounts to about 5 teaspoons.
As always, discuss your concerns with a board certified plastic surgeon (ABPS).

Thank you for the question and pictures.  Based on your photographs, I think that you are starting at a good place and should have a very nice outcome with breast augmentation surgery.  As you mentioned, there seems to be is a moderate amount of breast asymmetry and the use of different sizes of breast implants may help to improve overall breast symmetry.    Assuming an expertly executed procedure, I also think that your goal photographs are realistic, understanding of course that goal photographs are communication tools not guarantees of exact outcome.
 
  Generally speaking, the best online advice I can give to ladies who are considering breast augmentation surgery (regarding breast implant size/profile selection) is:
1. Concentrate on choosing your plastic surgeon carefully. Concentrate on appropriate training, certification, and the ability of the plastic surgeon to achieve the results you are looking for. ***Ask to see lots of examples of his/her work. Sometimes, it is necessary to seek several consultations before you feel comfortable about your choice.
2. Have a full discussion and communication regarding your desired goals with your plastic surgeon. This communication will be critical in determining breast implant size/type/profile will most likely help achieve your goals. 
In my practice, the use of photographs of “goal” pictures (and breasts that are too big or too small) is very helpful. I have found that the use of words such as “natural” or "C or D cup” etc may mean different things to different people and therefore prove unhelpful.
Also, as you know, cup size varies depending on him who makes the bra; therefore, discussing desired cup size may also be inaccurate. Again, best not to discuss your goals and/or judge the outcome of the procedure and Wisconsin, don't was insane so you can start some something one day before to work with the is a surgical note people is said performed based on achieving a specific cup size. The use of computer imaging may be very helpful during the communication process. The use of in bra sizers may also be helpful. In other words, use as many “visual aids” as possible during the communication process. I encourage patients to meet with me as my times as necessary, to feel comfortable that we are both on the “same page”.
3. Once you feel you have communicated your goals clearly, allow your plastic surgeon to use his/her years of experience/judgment to choose the breast implant size/profile that will best meet your goals. Again, in my practice, this decision is usually made during surgery. I generally select appropriate breast implant size/profile after the use of temporary intraoperative sizers and viewing the patient's chest in the upright and supine positions.
  
I hope this helps. Best wishes for an outcome that you will be very pleased with.

The implant size you select should be dependent upon your desired C size after the augmentation.  With your stature I would suggest a implant range of between 350cc -440cc. This implant range  will get you to a C+ to a D- cup size.  Good Luck