I am 5'5 and 120lbs and I'm 23 years old. I am just wondering if the 485 will look TOO FAKE?? I know they aren't going to look 100% real but I want them to be as natural as possible while still getting the shape and size I desire. The nurse I had the consultation with did mention sizing up because my breasts are lateral and the bigger implant will push them together a little to achieve a little bit more cleavage.
Answer: The right size for you? It is very difficult to determine the best size you will need (recommended based on your photos) or the exact size and shape implant you will require to best match your ideal breast image without an examination by a board certified plastic surgeon. Not just any board certified plastic surgeon, but one with many years of frequently performing breast augmentation surgery including different approaches, techniques and implant choices. This is because several measurements notto mention your breast characteristics are needed to determine the optimal implant size to obtain your goals. Without knowing these dimensions it would be difficult to make this determination. For example, the existing base width of your breast will determine, in many cases, the maximal volume per implant profile that you can accommodate. To illustrate; a 100 cc difference may make a significant difference with a narrow base width breast, but much less of a difference if you have a wide chest wall and wide breast “foot print”. Therefore, just because your friend may have a great result with let’s say a 300 cc implant to make her go from a “A” cup to a “C” cup size does not mean that you will have the same result with the same size implant. The same process goes for just filling in the upper part of your breast without becoming much larger. Further simply placing implants in a bra to determine the size best for you is not always accurate as the bra often distorts the size, is dependent on the pressure the bra places plus the implant is outside your breast and not under it among other variables. Computer software morphing programs that automatically determine the best implant size can be helpful in some but not all cases (e.g. doesn’twork well in my experience with existing implants, sagging or asymmetric breasts). Using “want to be” photos however are useful if simply provided to the surgeon as I will further explain in the link below including silicone vs saline implant
Helpful 1 person found this helpful
Answer: The right size for you? It is very difficult to determine the best size you will need (recommended based on your photos) or the exact size and shape implant you will require to best match your ideal breast image without an examination by a board certified plastic surgeon. Not just any board certified plastic surgeon, but one with many years of frequently performing breast augmentation surgery including different approaches, techniques and implant choices. This is because several measurements notto mention your breast characteristics are needed to determine the optimal implant size to obtain your goals. Without knowing these dimensions it would be difficult to make this determination. For example, the existing base width of your breast will determine, in many cases, the maximal volume per implant profile that you can accommodate. To illustrate; a 100 cc difference may make a significant difference with a narrow base width breast, but much less of a difference if you have a wide chest wall and wide breast “foot print”. Therefore, just because your friend may have a great result with let’s say a 300 cc implant to make her go from a “A” cup to a “C” cup size does not mean that you will have the same result with the same size implant. The same process goes for just filling in the upper part of your breast without becoming much larger. Further simply placing implants in a bra to determine the size best for you is not always accurate as the bra often distorts the size, is dependent on the pressure the bra places plus the implant is outside your breast and not under it among other variables. Computer software morphing programs that automatically determine the best implant size can be helpful in some but not all cases (e.g. doesn’twork well in my experience with existing implants, sagging or asymmetric breasts). Using “want to be” photos however are useful if simply provided to the surgeon as I will further explain in the link below including silicone vs saline implant
Helpful 1 person found this helpful
April 15, 2018
Answer: Implant size and type Dear briellebinding,Breast implant type and sizing selection is a complicated process and requires a detailed consultation that includes a discussion of your goals, a detailed examination, and a lengthy discussion. But the decision will always start and end with the patient. When it comes to sizing, we have all of our patients find 3 photos of their desired breast size. We ask for naked breast photos because clothing can obscure the true size (push up bras). Next, we consult with patients and go over the photos and take detailed breast measurements during a physical exam. Next, we using a sizing algorithm to determine a range of implants that will work based on the exam and the measurements.Lastly, during the operation, we use silicone sizers in the operating room to see how the size actually looks in the breast. We sit the patient up in the operating room, while asleep of course, and compare the sizer result with their desired look photos. If it is too small, we start the process over with a slightly larger implant. We don't stop until we get the perfect match.Of all of my breast augmentation patients, every one of them has been happy with their size due to this detailed and meticulous process. You don't want to invest time and money into a result that is either too big or too small.You should discuss your concerns with a board-certified plastic surgeon and make sure that your surgeon understands your goals.Daniel Barrett, MDCertified, American Board of Plastic Surgery Member, American Society of Plastic Surgery Member, American Society of Aesthetic Plastic Surgery
Helpful
April 15, 2018
Answer: Implant size and type Dear briellebinding,Breast implant type and sizing selection is a complicated process and requires a detailed consultation that includes a discussion of your goals, a detailed examination, and a lengthy discussion. But the decision will always start and end with the patient. When it comes to sizing, we have all of our patients find 3 photos of their desired breast size. We ask for naked breast photos because clothing can obscure the true size (push up bras). Next, we consult with patients and go over the photos and take detailed breast measurements during a physical exam. Next, we using a sizing algorithm to determine a range of implants that will work based on the exam and the measurements.Lastly, during the operation, we use silicone sizers in the operating room to see how the size actually looks in the breast. We sit the patient up in the operating room, while asleep of course, and compare the sizer result with their desired look photos. If it is too small, we start the process over with a slightly larger implant. We don't stop until we get the perfect match.Of all of my breast augmentation patients, every one of them has been happy with their size due to this detailed and meticulous process. You don't want to invest time and money into a result that is either too big or too small.You should discuss your concerns with a board-certified plastic surgeon and make sure that your surgeon understands your goals.Daniel Barrett, MDCertified, American Board of Plastic Surgery Member, American Society of Plastic Surgery Member, American Society of Aesthetic Plastic Surgery
Helpful
April 14, 2018
Answer: Too big? If you had a consultation with a nurse and not a plastic surgeon, you need to continue your search for a better practice. You should not make an important decision like this without the best advice possible. The photo you show of 'what I don't like' appears to have resulted from an implant too large to fit under muscle and having migrated into the submammary space (over muscle). This can be avoided by not going too big with your initial augmentation, with a plan to possibly replace your implants with a larger implants in the future.
Helpful 1 person found this helpful
April 14, 2018
Answer: Too big? If you had a consultation with a nurse and not a plastic surgeon, you need to continue your search for a better practice. You should not make an important decision like this without the best advice possible. The photo you show of 'what I don't like' appears to have resulted from an implant too large to fit under muscle and having migrated into the submammary space (over muscle). This can be avoided by not going too big with your initial augmentation, with a plan to possibly replace your implants with a larger implants in the future.
Helpful 1 person found this helpful
April 13, 2018
Answer: Too large? Patients often think in terms of cup size when considering augmentation. Unfortunately, devices are sized in terms of milliliters (cc) of volume. This can lead to some confusion when sizing. Additionally, it is important to remember that cup size itself is not standardized with variations from one manufacturer to another. Unfortunately, as many women can attest their cup size in an industry leader such as VS is not necessarily transferable to another brand. Another point which is often under appreciated is that of anatomy and starting point. Any implant will add volume to the volume which is already present. The implant is additive. A particular volume will not necessarily confer the same cup size to different patients (often times it will not even confer the same cup size to different breasts in the same individual...remember they are "sisters" not "twins"). A general rule of thumb is that 125cc can represent somewhere between 1/2 to a full cup size increase. Smaller volume differentials (25-50cc) are typically less consequential representing a volume change of less than a shot glass. However, I have found these numbers, at least anecdotally, to be of little help. Patients often present with notions/goals which do not correlate with these sorts of sterile volumetric assessments. When sizing patients, there are a number of useful tools including: -3D imaging (has the added benefit of offering a volumetric analysis of the pre-operative breast) -Breast sizers (rice bags) -Goal photos I also recommend that patients commit to a particular look rather than a cup size. Once a patient settles on a look that pleases them the overall cup size increase becomes less relevant.The key to obtaining a natural result is to stay within the parameters defined by your BWD. This will ensure that you avoid the dreaded "fake" look. A 485 cc HP augmentation is on the larger end of things but not necessarily inappropriate. However, it is difficult to say for certain without measurements. Your wish pics are biased towards a more dramatic look and a nearly 500 cc augmentation should provide that drama. However, smaller framed individuals do not tend to "naturally" have that sort of volume. Additionally, it is important to remember that your anatomy defines your cleavage. Going wider will not force the implants to the midline as the muscle limits this sort of migration. Alternatively, excess width will end up in your axilla/arm pit. As always, discuss your concerns with a board certified plastic surgeon (ABPS)
Helpful
April 13, 2018
Answer: Too large? Patients often think in terms of cup size when considering augmentation. Unfortunately, devices are sized in terms of milliliters (cc) of volume. This can lead to some confusion when sizing. Additionally, it is important to remember that cup size itself is not standardized with variations from one manufacturer to another. Unfortunately, as many women can attest their cup size in an industry leader such as VS is not necessarily transferable to another brand. Another point which is often under appreciated is that of anatomy and starting point. Any implant will add volume to the volume which is already present. The implant is additive. A particular volume will not necessarily confer the same cup size to different patients (often times it will not even confer the same cup size to different breasts in the same individual...remember they are "sisters" not "twins"). A general rule of thumb is that 125cc can represent somewhere between 1/2 to a full cup size increase. Smaller volume differentials (25-50cc) are typically less consequential representing a volume change of less than a shot glass. However, I have found these numbers, at least anecdotally, to be of little help. Patients often present with notions/goals which do not correlate with these sorts of sterile volumetric assessments. When sizing patients, there are a number of useful tools including: -3D imaging (has the added benefit of offering a volumetric analysis of the pre-operative breast) -Breast sizers (rice bags) -Goal photos I also recommend that patients commit to a particular look rather than a cup size. Once a patient settles on a look that pleases them the overall cup size increase becomes less relevant.The key to obtaining a natural result is to stay within the parameters defined by your BWD. This will ensure that you avoid the dreaded "fake" look. A 485 cc HP augmentation is on the larger end of things but not necessarily inappropriate. However, it is difficult to say for certain without measurements. Your wish pics are biased towards a more dramatic look and a nearly 500 cc augmentation should provide that drama. However, smaller framed individuals do not tend to "naturally" have that sort of volume. Additionally, it is important to remember that your anatomy defines your cleavage. Going wider will not force the implants to the midline as the muscle limits this sort of migration. Alternatively, excess width will end up in your axilla/arm pit. As always, discuss your concerns with a board certified plastic surgeon (ABPS)
Helpful
April 13, 2018
Answer: Breast augmentation, 485cc Hello and thank you for your question. You are a great candidate for a breast augmentation. The size, profile, and shape of the implant is based on your desired breast size/shape, your chest wall measurements, and soft tissue quality. This decision should be based on a detailed discussion with equal input from both you and your surgeon. This entire surgery can be performed with a small incision technique. Make sure you specifically look at before and after pictures of real patients who have had this surgery performed by your surgeon and evaluate their results. The most important aspect is to find a surgeon you are comfortable with. I recommend that you seek consultation with a qualified board-certified plastic surgeon who can evaluate you in person. Best wishes and good luck. Richard G. Reish, M.D. FACS Harvard-trained plastic surgeon
Helpful
April 13, 2018
Answer: Breast augmentation, 485cc Hello and thank you for your question. You are a great candidate for a breast augmentation. The size, profile, and shape of the implant is based on your desired breast size/shape, your chest wall measurements, and soft tissue quality. This decision should be based on a detailed discussion with equal input from both you and your surgeon. This entire surgery can be performed with a small incision technique. Make sure you specifically look at before and after pictures of real patients who have had this surgery performed by your surgeon and evaluate their results. The most important aspect is to find a surgeon you are comfortable with. I recommend that you seek consultation with a qualified board-certified plastic surgeon who can evaluate you in person. Best wishes and good luck. Richard G. Reish, M.D. FACS Harvard-trained plastic surgeon
Helpful