Should I go 485cc or 520cc if I have a wide torso of 13.2cm?

Hello,No surgeon can deliver a cup size; there is no correlation between implant volume and bra cups. Instead, do in office sizing to see how an implant actually looks while you're wearing an unpadded bra and a few favorite tops. If your surgeon isn't an ABPS certified/ASAPS member surgeon, you should visit a few who are. Best of luck!

Dear kyboom666,Breast implant type and sizing selection is a complicated process and requires a detailed consultation that includes a discussion of your goals, a detailed examination, and a lengthy discussion. But the decision will always start and end with the patient. When it comes to sizing, we have all of our patients find 3 photos of their desired breast size. We ask for naked breast photos because clothing can obscure the true size (push up bras). Next, we consult with patients and go over the photos and take detailed breast measurements during a physical exam. Next, we using a sizing algorithm to determine a range of implants that will work based on the exam and the measurements.Lastly, during the operation, we use silicone sizers in the operating room to see how the size actually looks in the breast. We sit the patient up in the operating room, while asleep of course, and compare the sizer result with their desired look photos. If it is too small, we start the process over with a slightly larger implant. We don't stop until we get the perfect match.Of all of my breast augmentation patients, every one of them has been happy with their size due to this detailed and meticulous process. You don't want to invest time and money into a result that is either too big or too small.You should discuss your concerns with a board-certified plastic surgeon and make sure that your surgeon understands your goals.Daniel Barrett, MD
Certified, American Board of Plastic Surgery
Member, American Society of Plastic Surgery
Member, American Society of Aesthetic Plastic Surgery

Hello and thank you for your question.  The
best advice you can receive is from an in-person consultation.  The size, profile, and shape of the
implant is based on your desired breast size/shape, your chest wall
measurements, and soft tissue quality.  This decision should
be based on a detailed discussion with equal input from both you
and your surgeon.   Make sure you specifically look
at before and after pictures of real patients who have had this surgery
performed by your surgeon and evaluate their results.   The most
important aspect is to find a surgeon you are comfortable with. I recommend
that you seek consultation with a qualified board-certified plastic surgeon who
can evaluate you in person.
Best wishes and good luck.
Richard G. Reish, M.D.  FACS
Harvard-trained plastic surgeon

I appreciate your questionAfter performing hundreds of breast augmentations, I have found that the size of implant best for you is dictated by your chest wall measurements.  Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance. Implants that are wider than this can be more palpable, fall more laterally overtime and also be more palpable. After that we will then choose the implant volume based on the measurements and also looking at any asymmetries you might have. You should choose a board certified plastic surgeon that you trust to help guide you in this decision. Bringing photos as well can help us to finalize, but please understand that these are of other peoples bodies and your results will probably be different.Silicone will give you a fullness at the top (upper pole fullness). Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a more softer silicone (less cross-linked), if this implant should rupture, it may leak but only into the scar capsule formed. However, the newer silicone in these implants may not leak even when the implant shell is ruptured. Anatomic gummy bear implants might be a good choice to give you a more natural look. These highly-sought-after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, are a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak. Implants, indifferent projections. The easiest way to think about it is they called me in a low medium and high projection or profile. Most of the time I use the medium profile which gives people the best in terms of natural look as well as a little bit of projection. High profile implants are for someone that wants  A little bit more of a fuller look. Low profile implants are better for someone that really wants a minimal extremely natural augmentation. Depending upon the anatomic versus round implants there are also subtle differences  in terms of the amount of projection for each profile. During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers. I also use a 3D imaging system to allow you to try on a variety of shapes and sizes. I prefer this method over adding volume due to implants being under the muscle.We will also discuss the possibility of needing a lift along with an implant. This will depend on the amount of ptosis (nipple position) as it relates to your breast, inframammary crease and chest wall. Needing a lift or not will also determine where to place the scar for the incision.  In some cases if the the breast and nipple is really ptotic (low) it might be best to stage the procedure by performing a lift first and then doing an implant at a second stage. This will also allow you to have a better understanding of the true size and shape of your breast.In order to limit pain from breast augmentation and speed the recovery process I offer patients Botox into their muscles as well as a long acting numbing medication called exparel. The best way to assess and give true advice would be an in-person exam. Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.best of luck!Dr SchwartzBoard Certified Plastic Surgeon #RealSelf100Surgeon#RealSelfCORESurgeon

The best cosmetic result in any particular breast augmentation patient depends on a variety of factors, including: Your individual anatomy, realistic expectations, a thorough discussion with the plastic surgeon about the options, and an understanding of the pros and cons of any particular implant choice. Proper sizing is not just about the number of cc’s. The thickness of your tissue, breast dimensions which include the width, height, and projection, as well as chest wall width all need to be considered when choosing an implant. Trying on implant “sizers” of various shapes and volumes while wearing a tight t-shirt, bra, or bathing sit at a preoperative visit will help you and your surgeon choose the optimal implant. 

There are no manufacturers' standards for cup sizing in the bra industry. The cups of a 32 D and a 38 D are significantly different. Cup size varies from manufacturer to manufacturer and even within styles from any particular manufacturer.

Keep in mind that following the advice from a surgeon on this or any other website who proposes to tell you exactly what to do without examining you, physically feeling the tissue, assessing your desired outcome, taking a full medical history, and discussing the pros and cons of each operative procedure would not be in your best interest. I would suggest you find a plastic surgeon certified by the American Board of Plastic Surgery and ideally a member of the American Society for Aesthetic Plastic Surgery (ASAPS) that you trust and are comfortable with. You should discuss your concerns with that surgeon in person. 

Robert Singer, MD FACS 

La Jolla, California

My best advice: more communication.
It is definitely worth spending more time (prior to the date of surgery) with your plastic surgeon to discuss further.  As you know, it will be important for many reasons, that you feel comfortable that you and your plastic surgeon are on the "same page" prior to proceeding. This additional communication will go a  long way when it comes to helping alleviate your anxiety prior to proceeding.There is no accurate/reliable/predictable correlation between size/profile breast implant utilized and cup size achieved. For example, I do not think that the generalizations of "200 cc equates to 1 cup" hold any validity or are helpful in any specific or practical way.  In my practice, I ask patients not to communicate their goals, or evaluate the outcome of the procedure performed, based on cup size references.Ultimately, careful selection of plastic surgeon and  careful communication of your goals (in my practice I prefer the use of goal pictures, direct examination/communication in front of a full-length mirror, in bra sizers, and computer imaging) as well as careful measurements (dimensional planning) will be critical.
  Generally speaking, the best online advice I can give to ladies who are considering breast augmentation surgery ( regarding breast implant size/profile selection) is:
1. Concentrate on choosing your plastic surgeon carefully. Concentrate on appropriate training, certification, and the ability of the plastic surgeon to achieve the results you are looking for. Ask to see lots of examples of his/her work.
2. Have a full discussion and communication regarding your desired goals with your plastic surgeon. This communication will be critical in determining breast implant size/type/profile will most likely help achieve your goals. 
In my practice, the use of photographs of “goal” pictures (and breasts that are too big or too small) is very helpful. For example, I have found that the use of words such as “natural” or "C or D cup" etc means different things to different people and therefore prove unhelpful.
Also, as you know, cup size varies depending on him who makes the bra; therefore, discussing desired cup size may also be inaccurate. Again, the use of computer imaging has been very helpful during the communication process, in our practice.
3. Once you feel you have communicated your goals clearly, allow your plastic surgeon to use his/her years of experience/judgment to choose the breast implant size/profile that will best meet your goals. Again, in my practice, this decision is usually made during surgery, after the use of temporary intraoperative sizers.
Again, in your case, my best advice: more communication. 
I hope this helps. Best wishes for an outcome that you will be very pleased with.
 

My suggestion is always to go bigger! The actual difference between the two is not that great and you do lose up to a cup size depending on where they are placed over a year!