450cc moderate plus vs 450cc high profile? (photos)

If your BWD is 12cm, then a 450cc moderate plus device would be too wide for your frame.  Even a 450HP would be too wide for your breast dimensions.  At 12cm breast width, that corresponds more to a 375 or 400 HP device.  I would discuss this with your surgeon or go for another consultation since both of those choices appear to be too wide for your frame.  I hope this helps.

Thanks for the question. In my practice for cases like yours I prefer use the Cohesive Gel - Silicone Breast Implants with textured cover ("gummy bear implants") They are quite safe and aesthetically best as they give a firmer consistency, better projection and natural appearance. Kind regards

Hello and thank you for your question. You are a great candidate
for a breast augmentation.  The size, profile, and shape of the
implant is based on your desired breast size/shape, your chest wall
measurements, and soft tissue quality.  This decision should
be based on a detailed discussion with equal input from both you
and your surgeon.  This entire surgery
can be performed with a small incision technique.  Make sure you
specifically look at before and after pictures of real patients who have
had this surgery performed by your surgeon and evaluate their results.  
Best wishes and good luck.
Richard G. Reish, M.D.
Harvard-trained plastic surgeon

I appreciate your question.

The size of implant best for you is dictated by your chest wall measurements.  Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance.  Other than that, you should choose the implant based on volume, not on the dimensions of the implant. You should choose a board certified plastic surgeon that you trust to help guide you in this decision.  

Silicone will give you a fullness at the top (upper pole fullness).

Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a more liquid silicone (less cross-linked), if this implant should rupture, it will leak only into the scar capsule formed around the implant but may cause some discomfort or implant distortion.

Anatomic gummy bear implants might be a good choice to give you volume.

These highly-sought-after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, are a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak.

During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers.

The best way to assess and give true advice would be an in-person exam.

Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.

Best of luck!

Dr. Schwartz

Board Certified Plastic Surgeon

#RealSelf100Surgeon

#RealSelfCORESurgeon

In order to choose the right implants for you, you would need to be seen in person. If you are very narrow, then a high profile might be right.

Thanks for the great question and the photos. So the 450cc moderate plus is going to have less projection and a wider base compared to the 450cc HP. These two implants are going to have different base widths, so one might fit your breast better than the other one. I tend to tell patients that the moderate plus profile is more of a natural look and the high profile gives more of an augmented look. If you use implants large enough in either profile it can still give a very augmented look. Look at photos of other women who are your size and see if you like the look better of the moderate plus or high profile implants. Best of luck!~Dr. Sieber

Thank you for the question. There are several steps taken to select a specific size/profile breast implant for a specific patient. The difference between the different profiles of breast implants available have to do with the dimensions (diameter and height) of the implants. For example, the high-profile implant has a greater projection and a smaller diameter compared to the moderate profile implant. The moderate plus profile implant as projection and diameter characteristics that fall between the moderate profile and high profile implants.
 
I prefer to have a wide selection of implants (all profiles) available in the operating room. I use intraoperative sizers and place the patient in the upright position to evaluate breast size. Use of these sizers also allow me to select the breast implant profile (low, moderate, moderate plus, high-profile) that would most likely achieve the patient's goals. The patient's goal pictures are hanging on the wall, and allow for direct comparison. I have found that this system is very helpful in improving the chances of achieving the patient's goals as consistently as possible.
Ultimately, careful selection of plastic surgeon and communication of your goals (in my practice I prefer the use of goal pictures, direct examination/communication in front of a full-length mirror, in bra sizers, and computer imaging) as well as careful measurements (dimensional planning) will be critical.
Generally speaking, the best online advice I can give to ladies who are considering breast augmentation surgery ( regarding breast implant size/profile selection) is:
1. Concentrate on choosing your plastic surgeon carefully. Concentrate on appropriate training, certification, and the ability of the plastic surgeon to achieve the results you are looking for. Ask to see lots of examples of his/her work.
2. Have a full discussion and communication regarding your desired goals with your plastic surgeon. This communication will be critical in determining breast implant size/type/profile will most likely help achieve your goals. 
In my practice, the use of photographs of “goal” pictures (and breasts that are too big or too small) is very helpful. For example, 
I have found that the use of words such as “natural” or "C or D cup” etc means different things to different people and therefore prove unhelpful.
Also, as you know, cup size varies depending on him who makes the bra; therefore, discussing desired cup size may also be inaccurate. Again, the use of computer imaging has been very helpful during the communication process, in our practice.
3. Once you feel you have communicated your goals clearly, allow your plastic surgeon to use his/her years of experience/judgment to choose the breast implant size/profile that will best meet your goals. Again, in my practice, this decision is usually made during surgery, after the use of temporary intraoperative sizers.
I hope this (and the attached link/video, dedicated to breast augmentation surgery concerns) helps. Best wishes.