Is 640cc too big?

Thank you for your question. You are still early in the post-operative period. It typically takes 3 - 6 months for the swelling to subside and and implants to settle into proper position. Please discuss your concerns with your board certified plastic surgeon. Also, make sure you follow all of your plastic surgeons post-operative instructions regarding level of physical activity and use of a support bra. Hope this helps and good luck with your recovery.

It is very difficult to determine the best size you will need (recommended based on your photos) or the exact size and shape implant you will require to best match your ideal breast image without an examination by a board certified plastic surgeon. Not just any board certified plastic surgeon, but one with many years of frequently performing breast augmentation surgery including different approaches, techniques and implant choices. This is because several measurements not to mention your breast characteristics are needed to determine the optimal implant size to obtain your goals. Without knowing these dimensions it would be difficult to make this determination. For example, the existing base width of your breast will determine, in many cases, the maximal volume per implant profile that you can accommodate. To illustrate; a 100 cc difference may make a significant difference with a narrow base width breast, but much less of a difference if you have a wide chest wall and wide breast “foot print”. Therefore, just because your friend may have a great result with let’s say a 300 cc implant to make her go from a “A” cup to a “C” cup size does not mean that you will have the same result with the same size implant. The same process goes for just filling in the upper part of your breast without becoming much larger. Further simply placing implants in a bra to determine the size best for you is not always accurate as the bra often distorts the size, is dependent on the pressure the bra places plus the implant is outside your breast and not under it among other variables. Computer software morphing programs that automatically determine the best implant size can be helpful in some but not all cases (e.g. doesn’t work well in my experience with existing implants, sagging or asymmetric breasts). Using “want to be” photos however are useful if simply provided to the surgeon as I will further explain in the link below including silicone vs saline implant
 #breastimplant

I appreciate your question.

The size of implant best for you is dictated by your chest wall measurements.  Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance.  Other than that, you should choose the implant based on volume, not on the dimensions of the implant. You should choose a board certified plastic surgeon that you trust to help guide you in this decision.  

Silicone will give you a fullness at the top (upper pole fullness).

Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a more liquid silicone (less cross-linked), if this implant should rupture, it will leak only into the scar capsule formed around the implant but may cause some discomfort or implant distortion.

Anatomic gummy bear implants might be a good choice to give you volume.

These highly-sought-after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, are a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak.

During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers.

The best way to assess and give true advice would be an in-person exam.

Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.

Best of luck!

Dr. Schwartz

Board Certified Plastic Surgeon

#RealSelf100Surgeon

#RealSelfCORESurgeon

Hello, without a proper assessment it is not possible to comment on the final result you might achieve with 640cc implants.  The vast majority of my patients receive implants much smaller than this but it depends on their breast dimensions, tissue coverage, skin tone, desired result and other factors.  

Hi and thank you for your question.  Without an in person examination and breast measurements it is impossible to tell what size implant is best for you.  That being said, 640cc is quite large and not even within the range of what most plastic surgeons would use for a breast augmentation.  Best you meet with a plastic surgeon in person to evaluate you and go over your expectations for size and end result in detail.  Good luck!

Hello and thank you for your question.  The
best advice you can receive is from an in-person consultation.   The size,
profile, and shape of the implant is based on your desired breast
size/shape, your chest wall measurements, and soft tissue quality. 
This decision should be based on a detailed discussion with
equal input from both you and your surgeon.   Make sure you
specifically look at before and after pictures of real patients who have
had this surgery performed by your surgeon and evaluate their
results.   The most important aspect is to find a surgeon you are
comfortable with. I recommend that you seek consultation with a qualified
board-certified plastic surgeon who can evaluate you in person.
Best wishes and good luck.
Richard G. Reish, M.D.
Harvard-trained plastic surgeon

You are tall and slender.  640 cc is a fairly large implant to put in someone who is starting with a 34-A cup size breast.  You will have to find a board certified real plastic surgeon who can examine you and make that determination.  Good Luck.

Thank you for the question. Despite your good description of body type, online consultants will not be able to provide you with specific enough advice to be truly helpful. Ultimately, careful selection of plastic surgeon and careful communication of your goals (in my practice I prefer the use of goal pictures, direct examination/communication in front of a full-length mirror, in bra sizers, and computer imaging)  as well as careful measurements (dimensional planning) will be critical.
 
Generally speaking, the best online advice I can give to ladies who are considering breast augmentation surgery ( regarding breast implant size/profile selection) is:
1. Concentrate on choosing your plastic surgeon carefully. Concentrate on appropriate training, certification, and the ability of the plastic surgeon to achieve the results you are looking for. ***Ask to see lots of examples of his/her work.
2. Have a full discussion and communication regarding your desired goals with your plastic surgeon. This communication will be critical in determining breast implant size/type/profile will most likely help achieve your goals. 
In my practice, the use of photographs of “goal” pictures (and breasts that are too big or too small) is very helpful. For example, 
I have found that the use of words such as “natural” or "D or DD cup” etc means different things to different people and therefore prove unhelpful.
Also, as you know, cup size varies depending on him who makes the bra; therefore, discussing desired cup size may also be inaccurate. Again, the use of computer imaging has been very helpful during the communication process, in our practice.
3. Once you feel you have communicated your goals clearly, allow your plastic surgeon to use his/her years of experience/judgment to choose the breast implant size/profile that will best meet your goals. Again, in my practice, this decision is usually made during surgery, after the use of temporary intraoperative sizers.
I hope this (and the attached link, dedicated to breast augmentation surgery concerns) helps. Best wishes. 

Hi - the most important feature about the implant you are choosing should be the base width to ensure that the implant fits your breast and your chest.  I would imagine 640cc moderate profile is too wide for your chest if you are a 34A, but you need an in person examination to determine the most appropriate implant sizes for you.  Choosing your implant size is a balance between how you would like to look, and what size is the safest for you to have a durable result which doesn't damage your skin and breast tissue in the long run.  You want to enjoy your new breasts for many years to come, not need to deal with rippling and sagging.  Best of luck in your process!

Well, 640cc is certainly a big implant, well at the far end of typical augmentation range. Large implant risks are double bubble, thinning and show through, rippling, and breast drooping. It is always best to choose the look, and ignore the number.