I was wondering if 420 CC ultra high profile would look like a small D on me?

Question

Hi I am currently an 5'3 weighing 105 lbs and would like to get from an A cup to a D cup and my doctor suggested 420cc ultra high profile considering my diameter is 11.7. Would a 420cc UHP look like a small D on me or can i go any bigger?

Gerald Minniti, MD, FACS · Answer

Hello,What does a 'small D cup' look like? I certainly don't know. Cup sizes are very variable, and there is no predictable formula of implant volume to bra size. The sooner you let go of the concept of wanting a bra size, the better for you. Instead, focus on in office sizing to see how you would actually look in the mirror. Using only your breast diameter to determine an implant volume is a very two dimensional way to deal with a three dimensional issue. There are other measurements that are just as important to objectively and reproducibly determine your anatomic capacity. If your surgeon isn't a ABPS certified and ASAPS member surgeon, you should visit a few who are. Best of luck!

Jaime S. Schwartz, MD, FACS · Answer

I appreciate your question.

The size of implant best for you is dictated by your chest wall measurements.  Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance.  Other than that, you should choose the implant based on volume, not on the dimensions of the implant. You should choose a board certified plastic surgeon that you trust to help guide you in this decision.

Silicone will give you a fullness at the top (upper pole fullness).

Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a more liquid silicone (less cross-linked), if this implant should rupture, it will leak only into the scar capsule formed around the implant but may cause some discomfort or implant distortion.

Anatomic gummy bear implants might be a good choice to give you volume.

These highly-sought-after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, are a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak.

During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers.

The best way to assess and give true advice would be an in-person exam.

Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.

Best of luck!

Dr. Schwartz

Board Certified Plastic Surgeon

Director-Beverly Hills Breast and Body Institute

#RealSelf100Surgeon

Tom J. Pousti, MD · Answer

Thank you for the question. There is no accurate/reliable/predictable correlation between size/profile breast implant utilized and cup size achieved. Online consultants will not be able to provide you with specific enough advice to be truly helpful.  Ultimately, careful communication of your goals (in my practice I prefer the use of goal pictures, direct examination/communication in front of a full-length mirror, in bra sizers, and computer imaging)  as well as careful measurements (dimensional planning) will be critical.

***Given that your surgery is coming up soon, I would suggest that you spend additional time communicating your goals/concerns directly with your plastic surgeon, preferably prior to the date of surgery.

Generally speaking, the best online advice I can give to ladies who are considering breast augmentation surgery ( regarding breast implant size/profile selection) is:

1. Concentrate on choosing your plastic surgeon carefully. Concentrate on appropriate training, certification, and the ability of the plastic surgeon to achieve the results you are looking for. Ask to see lots of examples of his/her work.

2. Have a full discussion and communication regarding your desired goals with your plastic surgeon. This communication will be critical in determining breast implant size/type/profile will most likely help achieve your goals.

In my practice, the use of photographs of “goal” pictures (and breasts that are too big or too small) is very helpful. For example, I have found that the use of know words such as “natural” or "small D cup” etc means different things to different people and therefore prove unhelpful.

Also, as you know, cup size varies depending on him who makes the bra; therefore, discussing desired cup size may also be inaccurate. Again, the use of computer imaging has been very helpful during the communication process, in our practice.

3. Once you feel you have communicated your goals clearly, allow your plastic surgeon to use his/her years of experience/judgment to choose the breast implant size/profile that will best meet your goals. Again, in my practice, this decision is usually made during surgery, after the use of temporary intraoperative sizers.

I hope this (and the attached link, dedicated to breast augmentation surgery concerns) helps. Best wishes for an outcome that you will be very pleased with.

Robert Singer, MD · Answer

The best cosmetic result in any
particular breast augmentation patient depends on a variety of factors,
including: your individual anatomy, realistic expectations, a thorough
discussion with the plastic surgeon about the options, and an understanding of
the pros and cons of any particular implant choice. Proper sizing is not just
about the number of cc’s. The thickness of your tissue, breast dimensions which
include the width, height, and projection, as well as chest wall width all need
to be considered when choosing an implant. Trying on implant “sizers” of
various shapes and volumes while wearing a tight t-shirt, bra, or bathing sit
at a preoperative visit will help you and your surgeon choose the optimal
implant.
There are no manufacturers' standards for cup sizing in the bra industry. The
cups of a 32 D and a 38 D are significantly different. Cup size
varies from manufacturer to manufacturer and even within styles from any
particular manufacturer. There is no direct correlation between implant number
of cc's and cup size in any particular patient.
Keep in mind that following the advice from a surgeon on this or any other website
who proposes to tell you exactly what to do without examining you, physically
feeling the tissue, assessing your desired outcome, taking a full medical
history, and discussing the pros and cons of each operative procedure would not
be in your best interest. I would suggest that your plastic surgeon be
certified by the American Board of Plastic Surgery and ideally a member of the
American Society for Aesthetic Plastic Surgery (ASAPS) that you trust and are
comfortable with. You should discuss your concerns with that surgeon in person.

Robert Singer, MD FACS
La Jolla, California

Jon A. Perlman, MD (retired) · Answer

Thanks for your question.  Without a face-to-face exam to determine the skin availability and looseness of your breast tissue it is impossible to give you a direct answer.Generally speaking for most patients based on how it fits a bra or measurements alone.  The ability to fine-tune by the use of sizers to me as barrel viewable Of that volume would achieve an upper C cup or possibly lower D cup but there is no guarantee.  My recommendation is that you set goals with your board-certified plastic surgeon and allow him/her to select the best implant during surgery to match your size goals.  I find that this is more accurate than having the patient select an implant based on how test implants fit in a bra or solely based on measurements.  The ability to fine-tune the implant selection based on the use of test implants or sizers during the surgery when the actual results can be evaluated to me is the most accurate method.  Most importantly is that you feel sense of confidence in your selected plastic surgeon that he/she will do their best to achieve your goals.Best wishes and good luck.Regards,Jon A Perlman M.D., FACSDiplomate, American Board of Plastic SurgeryMember, American Society for Aesthetic Plastic Surgery (ASAPS)ABC-TV Extreme Makeover SurgeonBeverly Hills, California

I was wondering if 420 CC ultra high profile would look like a small D on me?

Answers (5)

More Breast Implants Questions

225cc vs 250cc - which one will give me what I'm looking for? (Photo)

34a getting 309cc. Will this get me a C cup? (Photos)

Am I going too big? 34A to 450cc.

Unhappy with my implants, too small! 255cc round mod. 1 week post op. What do I do? (Photos)

Scared for surgery in 5 days?

What is difference between 375cc and 385cc and then 385cc to 400/405cc? All HP.

WE SEND PRETTY
EMAILS