Boob size, will 400cc fit my body style? 135lbs, 5'3. (photos)

It is very difficult without assessing you in person to know what implant size will be a good size for you. Keep in mind that implant size selection not only depends on your personal preference, but it also depends on your unique measurements. There are various types of implants that can help you attain the look you are going for. A thorough consultation with a board certified plastic surgeon will allow you to communicate what your desired result is and will inform you as to what is possible to achieve your goals. We have a device called the Vectra 3D imaging system that shows you what you will look like with any implant. Our patients are very happy with the choice of implant they make when using this system. To learn more about breast augmentation, you can read “A Comprehensive Guide to Breast Augmentation.”

The most important decision that you have to answer is how you want to look. For someone your size, 400 cc will likely give you about two cup size increase or a little more. I suggest that you take some time do check how specific implant volumes change your look. I do that with implant sizers and also with three dimensional photographic simulation. There are many considerations which determine the best implant to deliver your look. These include the softness of your breast and the width of your breast. Once we know what volume you really want, be can fit that to you by choosing the projection of the appropriate breast implant. It sounds complicated but it really makes sense once you go through the process. Good luck tomorrow and make sure that you have all of your questions answered by your chosen surgeon.

Good Luck Tomorrow!  Here are a few tips for you because this is perhaps
the hardest decision for a patient to make, as well as the surgeon.  Also see the video attached to my answer.  We spend up to two hours for our BA consults
to be sure there is careful communication. We do a full exam in front of a
full-length mirror taking six exact measurements.    We
put your photos on a large computer screen for imaging, and go over your
“ideal-size” photos. We then save this information to your password protected
“web account.”
     First and
foremost the implant should fit the dimensions of your breast and tissue cover.
 Balancing the implant to your
over-all body shape and tissue cover is essential.    The main thing is to
have the diameter of the implant fit the diameter of your breast "foot-print".
 Higher profile implants tend to have a smaller diameter.  Higher is really a marketing term, but often
translates into the same volume implant with a narrower base.  Saline implants actually tend to decrease in
diameter as they are inflated!  The average size chosen over our last 7,000 breast implants was
“350cc”.  BUT, 90% of our patients tell us they wish they were
bigger a year after BA.  (We will see you
every year for routine checks at no charge.) It’s like your mind incorporates
the "new you" into your own self-image over a period of time. Cup size estimates can be misleading, but I generally advise patients
that they will experience an increase of approximately one cup size per 200 cc.
 You can try on implants in the office by
placing them into a special bra.  The implant is also flattened somewhat when under
the muscle, so it is a good idea to bump it up a bit. Approximately 1-ounce (25cc) is added to the final volume to account for
flattening of the implant in the partial sub-muscular pocket.  Once you decide on a size you like, then add
on 25cc, because in real life the implant will be flattened slightly by your
tissues.  Multiple measurements need to
be taken to fit an implant to your exact anatomy.  Have your surgeon's
office show you the charts of the implant dimensions for the various profiles
of silicone and saline from the manufacturer.  Then you and your surgeon
can piece together the puzzle by matching your measurements, with your wishes,
versus your tissue cover and the available implants to arrive at
a surgical plan.  Keep in mind
larger implants tend to have more problems over the years.  Since silicone implants wrinkle less than
saline implants, they might be your best bet.
     You can
also approximate this at home by measuring out an equivalent amount of rice
placed into a cutoff foot of old panty-hose, and put this in your bra.  Wear this around the house for a while, and
see what you think.  Implant size must
square with assessments of tissue cover, breast diameter, and chest wall width.
 Multiple measurements of your chest wall
are taken (seven in total).  Implant size
selection has been an issue of much discussion.
    
Therefore, I use a wide variety of methods, but the implant size is
always established preoperatively.  Also,
patients are advised to bring reference photos demonstrating their ideal size
and shape.  A photo album of patient
pictures is maintained to assist them.  These photos ultimately help in determining
where the implants will be placed, since they can be shifted inside (to provide
more cleavage), to the outside, up or superiorly, and down or inferiorly during
surgery.  In determining the final size
selection, I always place the highest priority on the preoperative measurements
and potential tissue cover.  Finally,
your verbal requests are factored into the analysis.
     We use
the quick-recovery approach, so click on the web reference link below to have
this explained and you can see the list of Quick-Recovery (Flash-Recovery or
Rapid-Recovery) Breast Augmentation articles from peer-reviewed surgery
journals.  It is a surgical procedure that
uses special instruments and techniques to minimize tissue damage and avoid
touching the ribs. It causes far less trauma to surrounding tissue than
traditional approaches, and it dramatically reduces pain and recovery time. In
published studies of BA patients, 95-percent of women interviewed after the
procedure returned to normal daily activities within 24-hours. Quick-recovery
BA is not a “gimmick.”  These specialized
techniques, which actually speed recovery and get you back to your daily
routine, kids and work, are published in our plastic surgery journals.  Because these PS journals are “peer-reviewed”
and edited, they are the gold-standard in our field as being valid science.
Therefore, these are sound techniques, not marketing hype. 
     Be sure
to see only a board certified plastic surgeon (by ABPS - The American Board of
Plastic Surgery) who is a member of ASAPS (The American Society for Aesthetic
Plastic Surgery) and or a member of ASPS (The American Society of Plastic
Surgeons).  Also, ask if the PS has an
established, high volume breast augmentation practice, performing several
hundred breast augmentations each year.  Be sure the PS has been in practice for a
while, about 20-years might be a good gauge. 
Does the PS offer all three incisions? 
Discuss the implant type (gel or saline), shaped "gummy bear"
or non-shaped, smooth or textured, implant pocket (over or under the muscle)
and the "quick-recovery approach." 
Ask to see their before and after photos if you didn’t see any on their
website.  If they are experienced, they should have several 100 breast
implant patients for you to view.  I would also recommend that your doctor
offer you the chance to talk to past patients who would be happy to discuss
their experience with you.  You need to feel comfortable, so make sure the
environment is safe as in an accredited surgery center.  Also, ask a prospective surgeon if he or she
has ever published journal articles in professional peer-reviewed journals,
which they can provide you.      
All the best, “Dr. Joe”