I’m currently a 32a but very flat chested. I would like to get to a full C. Will 300cc be enough?

At size 32, each 100
cc of implant corresponds to 1 cup size change. 
200 cc implants should be able to get you to size C.  I always recommend women get the smallest
implant possible.  Large implants will
stretch the muscle and will descend.   Best Wishes,Gary Horndeski, M.D.

I recommend an in person consultation with a plastic surgeon to discuss your goals and be measured. After I do this with my patients, we then look at pictures of women with similar measurements with different size breast implants. My patients tell me that this process is very helpful in determining what size breast implant is right for them.
Dr. Ted Eisenberg, Board Certified Plastic Surgeon and Author

In most cases, 300cc is a big increase. It depends upon your measurements, existing breast anatomy and style/size implants.This is best done in person with your/a plastic surgeon and agreed upon before surgery.

Patients often think in terms of cup size when considering augmentation. Unfortunately, devices are sized in terms of milliliters (cc) of volume. This can lead to some confusion when sizing. Additionally, it is important to remember that cup size itself is not standardized with variations from one manufacturer to another. Unfortunately, as many women can attest their cup size in an industry leader such as VS is not necessarily transferable to another brand.
Another point which is often under appreciated is that of anatomy and starting point. Any implant will add volume to the volume which is already present. The implant is additive. A particular volume will not necessarily confer the same cup size to different patients (often times it will not even confer the same cup size to different breasts in the same individual...remember they are "sisters" not "twins"). 
A general rule of thumb is that 125cc can represent somewhere between 1/2 to a full cup size increase. Smaller volume differentials (25-50cc) are typically less consequential representing a volume change of less than a shot glass. However, I have found these numbers, at least anecdotally, to be of little help. Patients often present with notions/goals which do not correlate with these sorts of sterile volumetric assessments.
When sizing patients, there are a number of useful tools including:
-3D imaging (has the added benefit of offering a volumetric analysis of the pre-operative breast)
-Breast sizers (rice bags)
-Goal photos
I also recommend that patients commit to a particular look rather than a cup size. Once a patient settles on a look that pleases them the overall cup size increase becomes less relevant.The key to obtaining a natural result is to stay within the parameters defined by your BWD. This will ensure that you avoid the dreaded "fake" look. 
Assuming you have been sized appropriately, you should obtain a reasonable result. Just remember to "love the look" not "the cup."
As always, discuss your concerns with a board certified plastic surgeon (ABPS).

hello thank you for your question and provided information as well..Based on your question, it is difficult to evaluate your case without photos. my recommendation is a consultation in person with a certified plastic surgeon.

Dear AGS, going from an A to a C is a normal, reasonable goal.  Pick your implants ahead of time and then simply have your PS agree, if you can. We always do this. Then you won't wake up wondering what happened.  Here are the numbers, below and here are a few tips for you because this is perhaps
the hardest decision for a patient to make, as well as the surgeon.  Also see the video attached to my answer.  We spend up to two hours for our BA consults
to be sure there is careful communication. We do a full exam in front of a
full-length mirror taking six exact measurements.    We
put your photos on a large computer screen for imaging, and go over your
“ideal-size” photos. We then save this information to your password protected
“web account.”
     First and
foremost the implant should fit the dimensions of your breast and tissue cover.
 Balancing the implant to your
over-all body shape and tissue cover is essential.    The main thing is to
have the diameter of the implant fit the diameter of your breast "foot-print".
 Higher profile implants tend to have a smaller diameter.  Higher is really a marketing term, but often
translates into the same volume implant with a narrower base.  Saline implants actually tend to decrease in
diameter as they are inflated!  The average size chosen over our last 7,000 breast implants was
“350cc”.  BUT, 90% of our patients tell us they wish they were
bigger a year after BA.  (We will see you
every year for routine checks at no charge.) It’s like your mind incorporates
the "new you" into your own self-image over a period of time. Cup size estimates can be misleading, but I generally advise patients
that they will experience an increase of approximately one cup size per 200 cc.
 You can try on implants in the office by
placing them into a special bra.  The implant is also flattened somewhat when under
the muscle, so it is a good idea to bump it up a bit. Approximately 1-ounce (25cc) is added to the final volume to account for
flattening of the implant in the partial sub-muscular pocket.  Once you decide on a size you like, then add
on 25cc, because in real life the implant will be flattened slightly by your
tissues.  Multiple measurements need to
be taken to fit an implant to your exact anatomy.  Have your surgeon's
office show you the charts of the implant dimensions for the various profiles
of silicone and saline from the manufacturer.  Then you and your surgeon
can piece together the puzzle by matching your measurements, with your wishes,
versus your tissue cover and the available implants to arrive at
a surgical plan.  Keep in mind
larger implants tend to have more problems over the years.  Since silicone implants wrinkle less than
saline implants, they might be your best bet.
     You can
also approximate this at home by measuring out an equivalent amount of rice
placed into a cutoff foot of old panty-hose, and put this in your bra.  Wear this around the house for a while, and
see what you think.  Implant size must
square with assessments of tissue cover, breast diameter, and chest wall width.
 Multiple measurements of your chest wall
are taken (seven in total).  Implant size
selection has been an issue of much discussion.
    
Therefore, I use a wide variety of methods, but the implant size is
always established preoperatively.  Also,
patients are advised to bring reference photos demonstrating their ideal size
and shape.  A photo album of patient
pictures is maintained to assist them.  These photos ultimately help in determining
where the implants will be placed, since they can be shifted inside (to provide
more cleavage), to the outside, up or superiorly, and down or inferiorly during
surgery.  In determining the final size
selection, I always place the highest priority on the preoperative measurements
and potential tissue cover.  Finally,
your verbal requests are factored into the analysis.
     We use
the quick-recovery approach, so click on the web reference link below to have
this explained and you can see the list of Quick-Recovery (Flash-Recovery or
Rapid-Recovery) Breast Augmentation articles from peer-reviewed surgery
journals.  It is a surgical procedure that
uses special instruments and techniques to minimize tissue damage and avoid
touching the ribs. It causes far less trauma to surrounding tissue than
traditional approaches, and it dramatically reduces pain and recovery time. In
published studies of BA patients, 95-percent of women interviewed after the
procedure returned to normal daily activities within 24-hours. Quick-recovery
BA is not a “gimmick.”  These specialized
techniques, which actually speed recovery and get you back to your daily
routine, kids and work, are published in our plastic surgery journals.  Because these PS journals are “peer-reviewed”
and edited, they are the gold-standard in our field as being valid science.
Therefore, these are sound techniques, not marketing hype. 
     Be sure
to see only a board certified plastic surgeon (by ABPS - The American Board of
Plastic Surgery) who is a member of ASAPS (The American Society for Aesthetic
Plastic Surgery) and or a member of ASPS (The American Society of Plastic
Surgeons).  Also, ask if the PS has an
established, high volume breast augmentation practice, performing several
hundred breast augmentations each year.  Be sure the PS has been in practice for a
while, about 20-years might be a good gauge. 
Does the PS offer all three incisions? 
Discuss the implant type (gel or saline), shaped "gummy bear"
or non-shaped, smooth or textured, implant pocket (over or under the muscle)
and the "quick-recovery approach." 
Ask to see their before and after photos if you didn’t see any on their
website.  If they are experienced, they should have several 100 breast
implant patients for you to view.  I would also recommend that your doctor
offer you the chance to talk to past patients who would be happy to discuss
their experience with you.  You need to feel comfortable, so make sure the
environment is safe as in an accredited surgery center.  Also, ask a prospective surgeon if he or she
has ever published journal articles in professional peer-reviewed journals,
which they can provide you.      
All the best, “Dr. Joe”
 
 

Hi ags504,
Breast implant type and sizing selection is a complicated process and requires a detailed consultation that includes a discussion of your goals, a detailed examination, and a lengthy discussion. But the decision will always start and end with the patient. 

When it comes to sizing, we have all of our patients find 3 photos of their desired breast size. We ask for naked breast photos because clothing can obscure the true size (push up bras). Next, we consult with patients and go over the photos and take detailed breast measurements during a physical exam. Next, we using a sizing algorithm to determine a range of implants that will work based on the exam and the measurements.

Lastly, during the operation, we use silicone sizers in the operating room to see how the size actually looks in the breast. We sit the patient up in the operating room, while asleep of course, and compare the sizer result with their desired look photos. If it is too small, we start the process over with a slightly larger implant. We don't stop until we get the perfect match.

Of all of my breast augmentation patients, every one of them has been happy with their size due to this detailed and meticulous process. You don't want to invest time and money into a result that is either too big or too small.

You should discuss your concerns with a board-certified plastic surgeon and make sure that your surgeon understands your goals.

Daniel Barrett, MD, MHA, MS

Certified, American Board of Plastic Surgery

Member, American Society of Plastic Surgery

Member, American Society of Aesthetic Plastic Surgery

Thank you for your question. Its difficult to universally answer that question without seeing pictures of you. Every woman is unique, and so are you. One very helpful tool is the 3D-VECTRA machine. The system can simulate how you likely (its not 100%) will look like after the procedure. It allows you to run the animation with different size and shape implants. Many women find it very helpful in their decision making process, and maybe you will as well. And of course, if you have not already, I always recommend you being seen in consultation by a board certified plastic surgeon.Best wishes, Franziska Huettner

Hello and thank you for your question.  The
best advice you can receive is from an in-person consultation.  The size, profile, and shape of the
implant is based on your desired breast size/shape, your chest wall
measurements, and soft tissue quality.  This decision should
be based on a detailed discussion with equal input from both you
and your surgeon.   
Best wishes and good luck.
Richard G. Reish, M.D.  FACS
Harvard-trained plastic surgeon

I appreciate your question!

After performing hundreds of breast augmentations, I have found that the size of implant best for you is dictated by your chest wall measurements. Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance. Other than that, you should choose the implant based on volume, not on the dimensions of the implant. You should choose a board certified plastic surgeon that you trust to help guide you in this decision. Bringing photos as well can help us to finalize, but please understand that these are of other people’s bodies and your results will probably be different.

Silicone will give you fullness at the top (upper pole fullness). Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a softer silicone (less cross-linked), if this implant should rupture, it may leak but only into the scar capsule formed. However, the newer silicone in these implants may not leak even when the implant shell is ruptured.

Anatomic gummy bear implants might be a good choice to give you a more natural look. These highly sought after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, is a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak.

During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers. I also use a 3D imaging system to allow you to try on a variety of shapes and sizes. I prefer this method over adding volume due to implants being under the muscle.

We will also discuss the possibility of needing a lift along with an implant. This will depend on the amount of ptosis (nipple position) as it relates to your breast, inframammary crease and chest wall. Needing a lift or not will also determine where to place the scar for the incision.  In some cases if the breast and nipple is really ptotic (low) it might be best to stage the procedure by performing a lift first and then doing an implant at a second stage. This will also allow you to have a better understanding of the true size and shape of your breast.

The best way to assess and give true advice would be an in-person exam. Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.

Best of luck!

Dr. Schwartz

Board Certified Plastic Surgeon 

#RealSelf100Surgeon

#RealSelfCORESurgeon