What is the difference between the Inspira, high profile and the soft touch?

Allergan is the parent company that owns brands such as Natrelle breast implants, Botox, Coolsculpting, etc.  Inspira is the current product line of Natrelle silicone gel breast implants.  Within this product line are 5 different profiles termed low, low plus, moderate, full, extra full.  Allergan does not offer an implant that goes by the name “high profile” so it would be important to determine whether someone using the term “Inspira high profile” means full or extra full profile.

They also offer 3 different thicknesses of gel, all of which are significantly thicker, or more cohesive, than what was used 15 years ago.  Allergan considers all of their currently available gel implants as ”gummy”.  The least cohesive gel is termed “responsive”, the next is “soft touch”, and the most cohesive or thickest gel is termed “cohesive”.

A commonly used implant in my practice is catalog number SSF-345 which means smooth surface, soft touch gel thickness, full profile, 345 cc.

I hope this is helpful.

Thanks for your question! "Profile" refers to the dimensions - diameter and projection. The cohesiveness is defined by "responsive", "soft touch" or "cohesive". So, there is no comparison between soft touch and high profile because that's not comparing apples to apples. You can get a soft touch, high profile implant or you can get a responsive, high profile implant. The soft touch is more cohesive meaning that it is a little firmer but it also will have less rippling. Good luck!

Thank you for sharing your question.  Profile refers to the degree of projection of the implant from the chest wall for each cc volume, while soft touch refers to one of the three different silicone gel thicknesses found within the Inspira line - Responsive being the thinnest, Soft Touch middle of the road, and Cohesive being the thickest gel.  Hope this helps.

Natrelle is the company, Inspira is a line of silicone gel filled implants. Within that line, there are five different implant profiles, from a very flat implant (low profile) to a very ball shaped implant (high profile). There are many different sized implants, and almost all sizes come in any of the five profiles. Finally, the entire Inspira line of implants can come with a choice of either responsive (very soft gel, technically not considered highly cohesive or 'gummy'), soft touch (intermediate firmness), or cohesive gel (very firm and 'gummy') formulations. 

Dear bigmama61,
breast implant type and sizing selection is a complicated process and requires a detailed consultation that includes a discussion of your goals, a detailed examination, and a lengthy discussion. But the decision will always start and end with the patient. When it comes to sizing, we have all of our patients find 3 photos of their desired breast size. We ask for naked breast photos because clothing can obscure the true size (push up bras). Next, we consult with patients and go over the photos and take detailed breast measurements during a physical exam. Next, we using a sizing algorithm to determine a range of implants that will work based on the exam and the measurements.Lastly, during the operation, we use silicone sizers in the operating room to see how the size actually looks in the breast. We sit the patient up in the operating room, while asleep of course, and compare the sizer result with their desired look photos. If it is too small, we start the process over with a slightly larger implant. We don't stop until we get the perfect match.Of all of my breast augmentation patients, every one of them has been happy with their size due to this detailed and meticulous process. You don't want to invest time and money into a result that is either too big or too small.You should discuss your concerns with a board-certified plastic surgeon and make sure that your surgeon understands your goals.
Daniel Barrett, MD
Certified, American Board of Plastic Surgery
Member, American Society of Plastic Surgery
Member, American Society of Aesthetic Plastic Surgery

There're different levels of cohesively when it comes to Natrelle Inspire Implants. It is best to set up a formal consultation with a Board certified PS and see what you are a candidate for.

There are various levels of implant gel cohesivity (or more simply put...stiffness of the gel). The more cohesive the gel, the more more resistant to rippling and upper pole settling. However, this comes at a cost of softness. Within the Allergan line, there are 3 options: Responsive, Soft Touch, Cohesive. The cohesive is the thickest and most form stable gel ("gummy bear"). The soft touch represents an intermediate i.e. "soft yet firm" while the Responsive is the least cohesive and softest option.In my practice, the vast majority of patients will be content with the responsive option.As always, discuss your concerns with a board certified plastic surgeon (ABPS).Donovan Rosas MD
Board Certified by the American Board of Plastic Surgery
Member: American Society for Aesthetic Plastic
Surgery, American Society of Plastic Surgeons
RealSelf Verified Member
RealSelf Top 100
RealSelf
Hall of Fame

When I began practicing, over 23 years ago, there were few options for implant styles and profiles.  Now there are so many that it can become very confusing.  The profile refers to the height and width of the implant. Basically higher profile implants are not as wide and have more implant projection.Inspira is a newer silicone implant with 3 levels of cohesivity and basically is the same implant as the other Allergan silicone implants, the shell is just filled fuller with silicone. The Inspira comes in an original, soft touch and cohesive.  Basically the original is the least cohesive and the soft touch is slightly more cohesive (or gummy) and the cohesive is the firmest.  So the soft touch is not the least cohesive of the Inspira implants, its the middle one.  Quite frankly, I can not tell much difference in them and the soft touch is not supposed to be the softest, in my opinion they are running out of names.  Good luck, Jane

NATRELLE INSPIRA’s®, FDA-approved, SoftTouch Breast Implant is a form-stable gummy bear implant consisting of a medium firmness gel. The SoftTouch Breast Implant is an excellent option for patients who would like a firm, yet soft implant. The Responsive implant is the softest and least cohesive. The Cohesive implant is the most cohesive (when the implant is cut, the gel is so firm that it stays in place). The SoftTouch implant is an in-between option. 
The width of your chest wall determines the range of implant widths that would be appropriate for you.  For any given width, there are various projections that will alter the volume of the implants you select.  Increasing profile/projection will increase volume for a given implant width.  

Thank you for your question. Allergan is the manufacturer that carries the Inspira line. The Inspira line has three densities of silicone implants. They include responsive, soft touch, cohesive. The responsive implants are the softest and give you the most natural feel. These implants tend to droop slightly more than the cohesive. The cohesive implants are the firmest like a gummy bear, given said name. The cohesive implants give you the most fullness in the upper pole similar to a saline implant but with the softness of silicone. The soft touch implants fall in between the responsive and the cohesive. Each of these lines are then broken down into low profile, moderate profile, and high profile. The profile determines the amount of projection off the chest wall. I recommend consulting with a board-certified plastic surgeon who is a member of the American Society of aesthetic plastic surgeons. You should be able to feel and see the difference between each type during a consultation. Best of luck with your procedure.