Are Mentor silicone UHP 400cc textured right for me? (Photos)

Thank you for the question. Online consultants will not be able to provide you with specific enough advice to be truly helpful.  Ultimately, careful communication of your goals (in my practice I prefer the use of goal pictures, direct examination/communication in front of a full-length mirror, in bra sizers, and computer imaging) as well as careful measurements (dimensional planning) will be critical.

Given your concerns, I would suggest that you spend additional time communicating your goals/concerns directly with your plastic surgeon, preferably prior to the date of surgery.
Generally speaking, the best online advice I can give to ladies who are considering breast augmentation surgery ( regarding breast implant size/profile selection) is:
1. Concentrate on choosing your plastic surgeon carefully. Concentrate on appropriate training, certification, and the ability of the plastic surgeon to achieve the results you are looking for. Ask to see lots of examples of his/her work. 2. Have a full discussion and communication regarding your desired goals with your plastic surgeon. This communication will be critical in determining breast implant size/type/profile will most likely help achieve your goals.  In my practice, the use of photographs of “goal” pictures (and breasts that are too big or too small) is very helpful. For example, I have found that the use of know words such as “round, full bust” or "D or DD cup” etc means different things to different people and therefore prove unhelpful. Also, as you know, cup size varies depending on him who makes the bra; therefore, discussing desired cup size may also be inaccurate. Again, the use of computer imaging has been very helpful during the communication process, in our practice. 3. Once you feel you have communicated your goals clearly, allow your plastic surgeon to use his/her years of experience/judgment to choose the breast implant size/profile that will best meet your goals. Again, in my practice, this decision is usually made during surgery, after the use of temporary intraoperative sizers.
I hope this (and the attached link/video, dedicated to breast augmentation surgery concerns) helps. Best wishes for an outcome that you will be very pleased with. 

I appreciate your question.
The size of implant best for you is dictated by your chest wall measurements.  Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance.  Other than that, you should choose the implant based on volume, not on the dimensions of the implant. You should choose a board certified plastic surgeon that you trust to help guide you in this decision.   Silicone will give you a fullness at the top (upper pole fullness). Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a more liquid silicone (less cross-linked), if this implant should rupture, it will leak only into the scar capsule formed around the implant but may cause some discomfort or implant distortion.
Anatomic gummy bear implants might be a good choice to give you volume. These highly-sought-after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, are a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak.
During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers.
The best way to assess and give true advice would be an in-person exam. Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.
Best of luck!
Dr. Schwartz Board Certified Plastic Surgeon Director-Beverly Hills Breast and Body Institute #RealSelf100Surgeon Yes and No.

The look you are showing is a very augmented one and you would need high or ultra high profile to achieve it. If you sized out to 400cc as your desired size and have a narrow chest then UHP would be the only way to go. Ultimately you have to trust what your surgeon is suggesting, and if you don't then perhaps you are with the wrong surgeon.