Is 315cc a good size for me or too small?

I appreciate your question.The size of implant best for you is dictated by your chest wall measurements.  Once we determine that we can choose the profile based on what you want or need to achieve.  If you are seeking a natural look, then the diameter of the implant should be equal to or, more ideally, smaller than the width of your breast. The breast width is a measurement of how wide your breast is at the base, which should be measured at the level of the nipple. Choosing an implant that is smaller in diameter than your breast width will avoid the "side breast" fullness that is often associated with a more artificial appearance.  Other than that, you should choose the implant based on volume, not on the dimensions of the implant. You should choose a board certified plastic surgeon that you trust to help guide you in this decision.  Silicone will give you a fullness at the top (upper pole fullness).Silicone implants come pre-filled with a silicone gel and are the softest implant available. They feel more natural, which makes them a good option for women with less natural breast tissue; but they require a larger incision. It may be more difficult to realize if this type of implant has ruptured, so it is important to monitor them with annual follow-up visits. Additionally, because this implant contains a more liquid silicone (less cross-linked), if this implant should rupture, it will leak only into the scar capsule formed around the implant but may cause some discomfort or implant distortion.Anatomic gummy bear implants might be a good choice to give you volume.These highly-sought-after, anatomic implants offer a look that more closely resembles the natural silhouette of a breast, and, therefore, are a very attractive option for individuals seeking a natural-looking, aesthetic primary breast augmentation. Additionally, these implants are an especially excellent option for patients undergoing restorative or corrective breast surgery because they provide more stability, shape, and reduced incidence of capsular contracture. Compared to other types of silicone gel implants, the silicone in the cohesive gel implant is more cross-linked; therefore, should the implant shell “rupture,” it maintains its shape and silicone does not leak.During your breast augmentation consultation, you should feel the different types of implants available, and try on various implant sizers in front of a mirror to help you to get an idea of how you will look following the surgery. You should also bring pictures of the look you would like to achieve, as well as a favorite top to wear when trying on implant sizers.The best way to assess and give true advice would be an in-person exam.Please see a board-certified plastic surgeon that specializes in aesthetic and restorative breast surgery.Best of luck!Dr. SchwartzBoard Certified Plastic Surgeon#RealSelf100Surgeon#RealSelfCORESurgeon

Hi rtalawila,

Breast implant type and size selection is a complicated process and requires a detailed consultation that includes a discussion of your goals, a detailed examination, and a lengthy discussion of the pros and cons of the various types and sizes. But the decision will always start and end with the patient. 

When it comes to sizing, we have all of our patients find 3 photos of their desired breast size. We ask for naked breast photos because clothing can obscure the true size (push up bras). Next, we consult with patients and go over the photos and take detailed breast measurements during a physical exam. Next, we using a sizing algorithm to determine a range of implants that will work based on the exam and the measurements.

Lastly, during the operation, we use silicone sizers in the operating room to see how the size actually looks in the breast. We sit the patient up in the operating room, while asleep of course, and compare the sizer result with their desired look photos. If it is too small, we start the process over with a slightly larger implant. We don't stop until we get the perfect match.

Of all of my breast augmentation patients, every one of them has been happy with their size due to this detailed and meticulous process. You don't want to invest time and money into a result that is either too big or too small.

You should discuss your concerns with your plastic surgeon and make sure that your surgeon understands your goals.

Daniel Barrett, MD, MHA, MS

Certified, American Board of Plastic Surgery 

Member, American Society of Plastic Surgery

It is very difficult to determine the best size you will need (recommended based on your photos) or the exact size and shape implant you will require to best match your ideal breast image without an examination by a board certified plastic surgeon. Not just any board certified plastic surgeon, but one with many years of frequently performing breast augmentation surgery including different approaches, techniques and implant choices. This is because several measurements not to mention your breast characteristics are needed to determine the optimal implant size to obtain your goals. Without knowing these dimensions it would be difficult to make this determination. For example, the existing base width of your breast will determine, in many cases, the maximal volume per implant profile that you can accommodate. To illustrate; a 100 cc difference may make a significant difference with a narrow base width breast, but much less of a difference if you have a wide chest wall and wide breast “foot print”. Therefore, just because your friend may have a great result with let’s say a 300 cc implant to make her go from a “A” cup to a “C” cup size does not mean that you will have the same result with the same size implant. The same process goes for just filling in the upper part of your breast without becoming much larger. Further simply placing implants in a bra to determine the size best for you is not always accurate as the bra often distorts the size, is dependent on the pressure the bra places plus the implant is outside your breast and not under it among other variables. Computer software morphing programs that automatically determine the best implant size can be helpful in some but not all cases (e.g. doesn’t work well in my experience with existing implants, sagging or asymmetric breasts). Using “want to be” photos however are useful if simply provided to the surgeon as I will further explain in the link below including silicone vs saline implant

Thank you for your question. "Tissue based planning" relies on your chest and breast measurements and is the safest way to ensure good long term results. Your surgeon should determine what size and projection are necessary to give you your desired result based on your body's measurements. The best way to assess and give true advice would be an in-person exam. Please see a board-certified plastic surgeon that specializes in aesthetic breast surgery. Hope this helps and good luck with your surgery.

This would depend on your chest wall measurements and your expected results. It is best to consult with a board-certified plastic surgeon that you trust and thoroughly discuss your goal appearance. Implants with the same size would look different on each individual.

Thank you for the question. 
 There are several steps taken to select a specific size/profile breast implant for a specific patient. These steps will vary from one practice to another.  I prefer to have a wide selection of implants (all profiles) available in the operating room. I use intraoperative sizers and place the patient in the upright position to evaluate breast size. Use of these sizers also allow me to select the breast implant profile (low, moderate, moderate plus, high-profile) that would most likely achieve the patient's goals. The patient's goal pictures are hanging on the wall, and allow for direct comparison. I have found that this system is very helpful in improving the chances of achieving the patient's goals as consistently as possible. 
Ultimately, careful communication of your goals (in my practice I prefer the use of goal pictures, direct examination/communication in front of a full-length mirror, in bra sizers, and computer imaging) as well as careful measurements (dimensional planning) will be critical.
Generally speaking, the best online advice I can give to ladies who are considering breast augmentation surgery ( regarding breast implant size/profile selection) is:
1. Concentrate on choosing your plastic surgeon carefully. Concentrate on appropriate training, certification, and the ability of the plastic surgeon to achieve the results you are looking for. Ask to see lots of examples of his/her work.
2. Have a full discussion and communication regarding your desired goals with your plastic surgeon. This communication will be critical in determining breast implant size/type/profile will most likely help achieve your goals. 
In my practice, the use of photographs of “goal” pictures (and breasts that are too big or too small) is very helpful. For example, I have found that the use of words such as “look big” or "full D cup” etc means different things to different people and therefore prove unhelpful.
Also, as you know, cup size varies depending on him who makes the bra; therefore, discussing desired cup size may also be inaccurate. Again, the use of computer imaging has been very helpful during the communication process, in our practice.
3. Once you feel you have communicated your goals clearly, allow your plastic surgeon to use his/her years of experience/judgment to choose the breast implant size/profile that will best meet your goals. Again, in my practice, this decision is usually made during surgery, after the use of temporary intraoperative sizers.You should be aware that a significant percentage of patients at your stage of recovery will feel that they are too big or (more commonly) too small. I routinely ask my patients to wait at least 3-6 months before evaluating the end results of the breast augmentation surgery. This waiting time allows patients to (usually) physically and psychologically adapt to the new body image. 
From the physiological standpoint, it takes many months ( and even up to one year) to see the final results of surgery. factors such as swelling, tissue contraction, skin redraping, implant shifting etc. come into play. You may be pleasantly surprised wants to be "drop and fluff" phenomenon has occurred.
From the psychological standpoint, patients undergo an “adaptation period" during which time they get used to the changes that the surgical procedure has brought about. 
In your case, I would suggest continued patience and continued close follow-up with your plastic surgeon.
   Best wishes for an outcome that you will be very pleased with.