Here's an update as of October 19th, 2012:
Procedure was done on September 28th, 2012. So, being a "scientist" I wanted to get some numbers to determine if there in fact was a change because of the Coolsculpting. I use a measuring tool (caliper) called "Accu-Track" which we bought from Amazon for about $20. This is a body fat measurement tool.
I took 3 measurements of each area and averaged them out. I used the tool to measure my belly fat on the left, center (umbilical), and right side of my stomach. It's a little hard to get the left and right sides exactly the same since there are no set areas to mark...but for the center measurement I used my belly button as the reference guide (to keep it simple, I'll only give the center measurement). Measurements were as follows:
9/28/2012: center of stomach measured 40 mm of fat.
10/11/2012: Center of stomach measured 24 mm of fat.
10/19/2012: Center of stomach measured 12 mm of fat.
I have been using my TENs unit (an electrical stim unit used for pain relief) on my stomach area since it still has been sensitive. I wonder if this has helped to move the macrophages (fat eating cells) in and out of the area. Not sure.
So, that said, it appears that the procedure IS working. My clothes fit more loosely in the stomach. I'm glad I didn't throw away one of my favorite pairs of pants since they once again fit. Hope this all makes sense to you.
Final words for this update: Yep, it hurt...but I would do it again.
Recent comments
Posted to Really glad I did it...photos 4 months after my procedure on 20 Oct 2012
Posted to Really glad I did it...photos 4 months after my procedure on 19 Oct 2012